JET Tools JAT-202 User Manual - Page 4
Specific warnings for Impact Wrench
View all JET Tools JAT-202 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
20. Do not use power tools in damp or wet location, or expose them to rain. Keep work area well lighted. 21. Do not leave a connected tool unattended. When not in use, disconnect tool from air source. 22. Shut off air supply and discharge any residual pressure from tool before removing hose, making adjustments, changing accessories, or storing tool. 23. Make sure tool is switched off, and your finger off the trigger, before connecting to air supply. 24. Remove adjusting keys and wrenches before turning on tool. 25. Keep visitors a safe distance from the work area. Keep children away. 26. Give your work undivided attention. Looking around, carrying on a conversation and "horse-play" are careless acts that can result in serious injury. 27. Do not force a tool or attachment to do a job for which it was not designed. The right tool will do the job better and more safely. 28. Repetitive motions and/or exposure to constant vibration can be harmful to hands and arms. Take frequent breaks and relax hands during extended operation. Change posture to avoid discomfort or fatigue. 29. Compressed air can be harmful if directed toward sensitive areas of the body, and may propel small particles caught in the air stream. Exercise proper caution. 30. Use only recommended accessories; improper accessories may be hazardous. 31. Maintain tools with care. Keep air tool clean and oiled for best and safest performance. 32. Do not use combustible gases, carbon dioxide, oxygen or any bottled gas as an air source for the tool. These can present risk of explosion and serious injury. 33. Do not lubricate the tool with combustible liquids, such as kerosene, diesel or jet fuel. 34. Do not dispose of this tool with normal household waste. Never dispose of the air tool into fire. Specific warnings for Impact Wrench 35. This impact wrench is designed for removing and installing threaded fasteners. If you are not familiar with the proper and safe operation of a pneumatic impact wrench, do not use until proper training and knowledge have been obtained. 36. Use only impact sockets in good condition. Sockets in poor condition may reduce impact power, and could break, creating a safety hazard. 37. Use only sockets designated for use with impact wrenches. Never use hand tool sockets, as they can shatter. 38. Never hold socket, drive or drive extension with your hand during operation. 39. Make sure workpiece is secure and will not shift while operating impact wrench. Do not hold workpieces with your hand. 40. Make sure fastener can withstand rated torque of impact wrench. Familiarize yourself with the following safety notices used in this manual: fatal, injury. This means that if precautions are not heeded, it may result in serious, or even This means that if precautions are not heeded, it may result in minor injury and/or possible tool damage. 4 JAT-200,201,202 Impact Wrenches