JET Tools JAT-202 User Manual - Page 6
Tool specifications
View all JET Tools JAT-202 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Tool specifications Model number JAT-200 JAT-201 JAT-202 Stock number 505200 505201 505202 Square drive 3/4 in. 1 in. 1 in. (6 in. extension) Bolt capacity 1-1/16 in. 1-7/16 in. 1-7/16 in. Anvil retainer type Hog ring Hog ring + pin hole Hog ring + pin hole Impact mechanism Twin hammer Twin hammer Twin hammer Maximum torque Working torque Free speed 1600 lbf•ft (2169.3 N•m) 2000 lbf•ft (2711.6 N•m) 2000 lbf•ft (2711.6 N•m) 150-1200 lbf•ft 150-1200 lbf•ft 150-1200 lbf•ft (203.37-1626.98 N•m) (203.37-1626.98 N•m) (203.37-1626.98 N•m) 5500 RPM 5000 RPM 5000 RPM Blows per minute 1100 900 900 Average air consumption 8.5 CFM 9 CFM 9 CFM Air inlet 1/2 in. NPT 1/2 in. NPT 1/2 in. NPT Air hose inside diameter 3/4 in. 3/4 in. 3/4 in. Required air pressure 90 psi (621 kPa) 90 psi (621 kPa) 90 psi (621 kPa) Vibration value 15.4 m/s2 17.2 m/s2 14.5 m/s2 Noise level 1 Power setting Grip 116 dB(A) 3-position forward 3-position reverse D-handle with inside trigger, + side handle 121 dB(A) 3-position forward 3-position reverse D-handle with inside trigger, + side handle 120 dB(A) 3-position forward 3-position reverse D-handle with inside trigger, + side handle Overall Length 12.5 in. (317.5 mm) 13.7 in. (348 mm) 19.2 in. (487.68 mm) Housing material Net weight Aluminum alloy with composite shell 12.57 lb. (5.70 kg) Aluminum alloy with composite shell 16.32 lb. (7.40 kg) Aluminum alloy with composite shell 17.86 lb. (8.10 kg) Shipping weight 15.51 lb. (7.04 kg) 19.25 lb. (8.73 kg) 22.08 lb. (10.02 kg) 1 The specified values are emission levels and are not necessarily to be seen as safe operating levels. As workplace conditions vary, this information is intended to allow the user to make a better estimation of the hazards and risks involved only. Specifications were current at time of publication, but because of our policy of continuous improvement, JET reserves the right to change specifications at any time and without prior notice, without incurring obligations. 6 JAT-200,201,202 Impact Wrenches