JVC D347US Instruction Manual - Page 15
Viewfinder Adjustment, Brightness Adjustment Of The, Display, Tripod Mounting
UPC - 046838026928
View all JVC D347US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
GETTING STARTED EN 15 GETTING STARTED Viewfinder Adjustment 1 Set the Power Switch to "REC" while pressing down the Lock Button located on the switch. 2 Make sure the LCD monitor is closed and locked. Pull out the viewfinder fully and adjust it manually for best viewability. 3 Turn the Diopter Adjustment Control until the indications in the viewfinder are clearly focused. Example: Diopter Adjustment Control CAUTION: When retracting the viewfinder, take care not to pinch your fingers. Brightness Adjustment Of The Display 1 Set the Power Switch 3 to "REC" or "PLAY" while 2 pressing down the Lock Button located on the 1 switch. 2 Open the LCD monitor fully. (੬ pg. 18) ● To adjust the brightness of 4 the viewfinder, pull out the viewfinder fully and set MENU "PRIORITY" to "FINDER" (੬ pg. 22, 24). 3 Press MENU. The Menu Screen appears. If BRIGHT -1 you are in Playback mode, please proceed to Step 5. 4 Press 3 or 4 to select "DISPLAY", and press SET or 2. The DISPLAY Menu appears. 5 Press 3 or 4 to select "BRIGHT", and press SET or 2. The Menu Screen closes and the brightness control menu appears. 6 Press 3 or 4 until the appropriate brightness is reached and press SET or 2. 7 Press MENU. The menu screen closes. Tripod Mounting To attach the camcorder to a tripod, align the direction stud and screw to the mounting socket and stud hole on the camcorder. Then tighten the screw clockwise. ● Some tripods are not equipped with studs.