JVC DLA-VS47NV Operation Manual - Page 20
Securing the projector ceiling mount, Set up, Installing the ceiling mounting bracket
View all JVC DLA-VS47NV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Set up Securing the projector (ceiling mount) Installing the ceiling mounting bracket A Remove the rear foot (x2). 0 It is not necessary to remove the front feet. However, it will not pose any usage problems even when they are removed. Front 0 Be sure to ask your dealer to install the unit for you. Installing the unit on your own may cause the unit to fall resulting in injury. 0 Take the necessary actions to prevent the main unit from falling off such as during an earthquake. 0 Regardless of the warranty period, JVC is not liable for any product damage caused by mounting the unit with non-JVC ceiling fittings or to an environment that is not suited for ceiling mount. 0 When using the unit with it suspended from a ceiling, pay attention to the surrounding temperature. When a heater is in use, the temperature around the ceiling may be higher than expected. 0 To attach the unit to the ceiling mount bracket, set the torque between the range of 1.5N m to 2.0N m. Tightening with torque exceeding the above range may cause damage to the unit, which may result the unit to fall. 0 When reusing the ceiling mount bracket of an old model, consult the specialist to check if there are any issues with the surrounding space and increase in weight. 0 Install the outlet at an accessible height to unplug from the wall. Or install the circuit breaker at an accessible height to shut down the projector. If you need information, please consult your authorized dealer or specialist. A Rear B Install the ceiling mounting brackets to the screw holes indicated by the arrows. 0 Use screws that meet the specification. 0 For details, contact your authorized dealer. Front Rear 20