JVC DLA-VS47NV Operation Manual - Page 47
Func Function, Sync Out, Off Timer, Network, Adjust/Set
View all JVC DLA-VS47NV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Function Sync Out For selecting the type of signal to output from Sync Out. Setting Description Input (Positive) Outputs a signal that is synchronized with the vertical sync signal of the input video signal. (*1) Input (Negative) Outputs a signal with reversed polarity that is synchronized with the vertical sync signal of the input video signal. (*1) Low Fixes the output at Low.(*2) High Fixes the output at High.(*2) FEDSC Outputs a signal that is synchronized with the polarity information included in the FEDSC packet. Outputs a Low when there is no FEDSC packet. *1 Outputs the e-shift driving waveform if "e-shift" is set to "On(Positive)", "On(Negative)" or "On(FEDEC)". *2 Does not function when "Display Mode" is set to "NV(FS)". 0 3D sync signal is output during 3D signal input regardless of this setting. Output signal varies as follows according to the format of the 3D signal. Input Signal Output Signal Dual, Quad (frame sequential) Outputs a signal that is synchronized with the input video signal. Dual, Quad (stripes) Outputs a signal that is synchronized with the polarity information included in the FEDSC packet. Polarity switches to the setting in "3D Setting" " "Polarity". Off Timer For setting the duration before the power turns off automatically when the projector is not operated. 0 Setting values: "Off", "1 Hour", "2 Hours", "3 Hours" and "4 Hours" * The setting will be retained even after the Off Timer operation has completed. Network For specifying the settings for external control from a PC or smartphone. Setting DHCP Client On Off IP Address Subnet Mask Default Gateway MAC Address Set Description Obtains the IP address automatically from the DHCP server inside the connected network. For configuring the network settings manually. For configuring the IP address. For configuring the subnet mask. For configuring the default gateway. Displays the MAC address of the unit. Applies the network settings. Adjust/Set 47