JVC DLA-VS47NV Operation Manual - Page 22
Connecting the Projector, Connecting to the DisplayPort Terminals, Connecting to the LAN Terminal
View all JVC DLA-VS47NV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Set up Connecting the Projector 0 Do not turn on the power until connection is complete. 0 The connection procedures differ according to the device used. For details, please refer to the instruction manual of the device to be connected. 0 This projector is used for projecting images. To output the audio of connected devices, please connect a separate audio output device, such as an amplifier or speaker. 0 Some cables cannot be connected to this unit due to the size of their connector cover. Connecting to the DisplayPort Terminals This Unit PC, etc. To [DisplayPort 1] to [DisplayPort 4] Input Terminals DisplayPort Cable (Sold Separately) DisplayPort Terminal 0 For single-channel input signals, connect to one of the [DisplayPort 1], [DisplayPort 2], [DisplayPort 3] or [DisplayPort 4] input terminals. 0 For two-channel input signals, connect to the [DisplayPort 1] and [DisplayPort 3] input terminals. 0 For four-channel input signals, connect to the [DisplayPort 1] to [DisplayPort 4] input terminals. Æ "Types of Possible Input Signals" (P. 66) 0 Video images may not appear if a cable that does not support HBR2 is used. Use a cable that supports HBR2. 0 When disconnecting the DisplayPort cable, make sure to release the latch and unplug the cable. Connecting to the LAN Terminal This Unit To [LAN] Terminal Desktop PC, etc. Hub Network Connection Cable (Sold Separately) Server 0 The network is used to control this unit. It is not used for sending or receiving video signals. 0 Please contact your network administrator for information concerning the network connection. 0 For more information on control, please refer to "External Control"P. 59. 22