JVC DR-MH30S Instruction Manual - Page 22
Clock Set, Semiauto Clock Set, Manual Clock Set
View all JVC DR-MH30S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
22 EN INITIAL SETTINGS Clock Set Perform clock setting only if the clock has not been set correctly by the Plug&Play setting. ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/DBS/DVD switch to DVD. CABLE/DBS TV DVD NOTE: If an incorrect time is displayed by the Plug & Play function, you may be receiving the clock setting data of a PBS channel from an adjacent time zone or from an incorrect PBS channel from a cable TV system. If you selected "AUTO" for the host channel in step 5, be sure to select the correct time zone manually. 8 Press SET UP to complete the setting. IMPORTANT: Turn off the unit after performing Semiauto Clock. "AUTO" will appear on the front display panel while the clock is being set. The current clock time will appear automatically when the clock setting is complete. ENTER rtwe SET UP Semiauto Clock Set You can change the host channel/D.S.T. (Daylight Saving Time)/ time zone setting manually. NOTE: The time set previously will be erased when "AUTO CLOCK", "HOST CH", "D.S.T." or "TIME ZONE" setting is changed. 1 Press SET UP to access the Main Menu screen. 2 Press w e to select "INITIAL SET UP", then press ENTER. 3 Press w e to select "CLOCK SET UP", then press ENTER. DVD VIDEO SET UP HDD/DVD SET UP FUNCTION SET UP INITIAL SET UP TUNER SET UP STB SET UP CLOCK SET UP 4 Press rt to select "AUTO AUTO CLOCK ON CLOCK", then press ENTER. HOST CH AUTO D. S. T. AUTO Press rt to select "ON", then TIME ZONE AUTO press ENTER. 5 Press rt to select "HOST CH", then press ENTER. SET UP EXIT ENTER SELECT SELECT WITH [ ] THEN PRESS [ENTER] PRESS [SET UP] TO EXIT Press rt to select "AUTO" or the desired PBS channel number, then press ENTER. NOTE: Some PBS channels do not transmit clock setting data. 6 Press rt to select "D.S.T.", then press ENTER. Press rt to select the desired setting, then press ENTER. AUTO: Select if you want to adjust your unit's clock automatically by the incoming signal from the host channel. Be sure to select the correct time zone manually in step 7. ON: Adjustment will be made by the built-in clock itself. OFF: Select when Daylight Saving Time does not apply to you. 7 Press rt to select "TIME ZONE", then press ENTER. Press rt to select "AUTO" or the desired time zone, then press ENTER. ● Each time you press rt, the time zone changes as follows: {AUTO{ATLANTIC{EASTERN{CENTRAL{ MOUNTAIN{PACIFIC{ALASKA{HAWAII{ (back to the beginning) Auto Daylight Saving Time This function enables automatic adjustment of the unit's clock at the start and end of Daylight Saving Time. With Auto DST activated, - - on the first Sunday of April at 2:00 AM, the clock is adjusted to 3:00 AM. - on the last Sunday of October at 2:00 AM, the clock is adjusted to 1:00 AM. NOTE: Timer recording may not function correctly at the time Daylight Saving Time is adjusted. Manual Clock Set 1 Press SET UP to access the Main Menu screen. 2 Press w e to select "INITIAL SET UP", then press ENTER. 3 Press w e to select "CLOCK SET UP", then press ENTER. DVD VIDEO SET UP HDD/DVD SET UP FUNCTION SET UP TUNER SET UP STB SET UP CLOCK SET UP INITIAL SET UP AUTO CLOCK HOST CH D. S. T. TIME ZONE ON AUTO AUTO AUTO 4 Press rt to select "AUTO CLOCK", then press ENTER. SET UP EXIT ENTER SELECT SELECT WITH [ ] THEN PRESS [ENTER] PRESS [SET UP] TO EXIT DVD VIDEO SET UP HDD/DVD SET UP FUNCTION SET UP TUNER SET UP STB SET UP CLOCK SET UP INITIAL SET UP Press rt to select "OFF", then AUTO CLOCK OFF press ENTER. TIME - - : - - 5 Press rt to select "TIME", then press ENTER. Press rt until the desired time appears, then press ENTER to start clock. DATE YEAR D. S. T. 1/1(THU) 2004 ON SET UP EXIT ENTER SELECT SELECT WITH [ ] THEN PRESS [ENTER] PRESS [SET UP] TO EXIT ● Set the date and year in the same way. ● Holding rt changes the time in 30-minute intervals, or changes the date in 15-day intervals. 6 Press rt to select "D.S.T.", then press ENTER. Press rt to select the desired setting, then press ENTER. ON: Adjustment will be made by the built-in clock itself. OFF: Select when Daylight Saving Time does not apply to you. 7 Press SET UP to complete the setting.