JVC DR-MH30S Instruction Manual - Page 40
BASIC OPERATIONS ON HDD DECK, Basic Recording, Recording Resume Function, NOTES
View all JVC DR-MH30S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
40 EN BASIC OPERATIONS ON HDD DECK Basic Recording ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/DBS/DVD switch to DVD. ATTENTION: The HDD on the unit requires approximately 20 seconds to start up after the unit has been turned on, during which no operation can be made. HDD 8 7 HDD Lamp CABLE/DBS TV DVD HDD 0-9 CH+/- Pause recording on HDD deck It is not possible to pause recording. Pressing 9 initiates Live Memory Playback. However, it is still possible to pause recording only when recording the channels of external sources ("L-1", "L-2", "F-1", and "DV"). Press and hold 7, then press 9 on the remote. To resume recording, press and hold 7, then press 4 on the remote. No operation can be made with the buttons on the unit. Recording Mode Select XP or SP for programs where quick movement occurs, such as sports programs, and LP or EP for talk shows, etc. with relatively less movement. DR-MH30S DR-MH20S HDD capacity 160 GB 80 GB Recording Time XP 1 hour SP 2 hours Approx. 34 hours Approx. 68 hours Approx. 17 hours Approx. 34 hours LP 4 hours Approx. 136 hours Approx. 68 hours EP 6 hours Approx. 204 hours Approx. 102 hours FR480 8 hours Approx. 272 hours Approx. 136 hours ● For details on FR mode, refer to "Free Rate Function" (੬ pg. 39) Recording Resume Function If there is a power outage during recording, Instant Timer Recording (ITR) (੬ pg. 41) or timer recording (੬ pg. 46, 48), the recording will resume automatically when power is restored to the unit unless the unit's memory backup has expired. 4 8 9 7 REC MODE 1 Press HDD so that the HDD lamp lights up on the unit. 2 Press CH +/- or the number keys to select the channel you wish to record. 3 Press REC MODE repeatedly to select the recording mode, then press ENTER. ● Each time you press REC MODE, the recording mode changes as follows: XP ] SP ] LP ] EP ] FR60-FR360* ] FR420, FR480] (Back to the beginning) * The value is selectable from 1 to 6 hours in 5-min. increment by pressing w e repeatedly after selecting "FR60-FR360". To change the value in 30-min. increments, press and hold w e. ● For details on the recording mode, see the right column. 4 Press 7 on the unit to start recording. Or press and hold 7 and press 4 on the remote control. 5 Press 8 twice to stop recording. ● Pressing 8 once displays the confirmation message to stop recording. Press 8 again to terminate recording. NOTES: ● Continuous recording for over 48 hours is not possible. ● It is not possible to record both on DVD and on HDD simultaneously.