JVC DR-MH30S Instruction Manual - Page 59
Manual Dubbing (From HDD To DVD), EDITING
View all JVC DR-MH30S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Manual Dubbing (From HDD To DVD) It is possible to perform dubbing in the desired transfer rate. 1 Load a recordable disc. 2 Press DUBBING to access the Dubbing Menu screen. 3 Press rtw e to select "MANUAL", then press ENTER. 4 Perform step 4 of "High Speed Dubbing (From HDD To DVD)". The Manual Dubbing screen appears. 5 Press rt to select "REC MODE", then press ENTER. Press rt to select the desired option, then press ENTER. The confirmation screen appears. NOTES: ● In Video mode, if the selected play list includes the scenes recorded in the different transfer rate, the dubbing is performed in the highest transfer rate of the scenes in the selected play list. However, the lower transfer rate cannot be dubbed in the higher transfer rate. ● It is not possible during dubbing to play back on HDD or DVD or to set timer-programing. Original Dubbing (From DVD To HDD) It is possible to dub the original recordings on DVD discs to the HDD deck. 1 Load a disc you want to dub. 2 Press DUBBING to access the Dubbing Menu screen. 3 Press rtw e to select "TITLE", then press ENTER. 4 Press rtw e to select indexes (small pictures) of desired original recordings and/or play lists, then press MARK. After selecting all indexes you want to dub, press ENTER. ● You can select up to 8 original recordings and/or play lists. 5 Press rt to select "EXECUTE" or "AUTO POWER OFF", then press ENTER to start dubbing. EXECUTE: Select this to continue the dubbing operations. AUTO POWER OFF: Select this to continue the dubbing operations and turn off the unit after dubbing. CANCEL: Select this to cancel dubbing operation. 6 Press w e to select "EXECUTE", then press ENTER for confirmation. The dubbing screen appears for 5 seconds. NOTES: ● It is not possible to dub play lists on DVD discs. ● It is not possible to dub pre-recorded DVD VIDEO discs. EDITING EN 59 About Disc Remaining Display The unit displays the time information for dubbing by bar meter. By comparing the disc remaining time and the necessary time for dubbing of the selected items, it is possible to check if the dubbing can be performed completely or not. When performing the High Speed Dubbing Capacity of a disc Remaining capacity Dark green: Length of already recorded item Light green: Length of selected item Yellow: Length of the item now being selected by arrow Red: Excess over the capacity 21% When performing the Just Dubbing TOTAL 105MIN ● The unit displays the status on the assumption that the selected items are dubbed in the lowest transfer rate. ● The total time of a loaded disc is displayed on the right of the bar meter. When performing the Manual Dubbing MAX FR240 ● The unit displays the status on the assumption that the selected items are dubbed in the lowest transfer rate. ● The available highest transfer rate is displayed on the right of the bar meter. NOTE: The bar meter moves up and down regularly, but this is not a malfunction.