JVC DT-3D24G1U DT-3D24G1U Operation Manual - Page 27

Display Functions to be controlled TALLY SEL Selects the color of the tally lamp SDI 1/L Changes the input to "SDI 1/L" SDI 2/R Changes the input to "SDI 2/R" DVI Changes the input to "DVI" 3D Activates/Deactivates the 3D mode MIX 3D FORMAT Activates/Deactivates the MIX mode 3D format 1/3D format 2 change *3 3G-B.DS Selects the data stream of "3G SDI LEVEL B" DUAL LINK Turns on or off "SDI DUAL LINK" MARKER Displays the area and safety markers FRAME Indication of the area of the specified aspect ratio C.MARKER MARK.SEL The center marker indication Selects the items of "MARKER" *4 ASPECT Changes the aspect ratio 1:1 STATUS Displays in 1:1 mode Status display *5 L.METER Audio level meter display TIME CODE SOURCE ID Time code display → "SOURCE ID" in "INFORMATION" on page 24 PARA.WFM Displays the wave form monitor (Normal or Parallel) PARA.VS Displays the vector scope (Normal or Parallel) BAL.WFM Displays the wave form monitor (Normal or Difference) BAL.VS Displays the vector scope (Normal or Difference) COLOR OFF Color off SCR CHECK Screens check I/P MODE Change a mode according to the input picture MUTING Muting on/off DIMMER Change the intensity of the button lamps −−− No function Opening Short-circuiting Green Red Invalid Valid Invalid Valid Invalid Valid Off On Off On FORMAT1 FORMAT2 DS1 DS2 Off On Off On Off On Off On Non-"R-" items "R-" items 4:3 16:9 Off On → "On the Status Display" on page 11 *6 Off On *7 *8 Color Off NORMAL - Monochrome *9 *10 On DARK - *3 The 3D format changes in the same way as the SELECT button pressed in 3D mode. *4 Selects which functions in "MARKER" are activated, non-"R-" items or "R-" items (→ "MARKER" on page 20). *5 Displays the information shown when INPUT SELECT button of the current input is pressed (→ "On the Status Display" on page 11). While controlling with the MAKE system, the information is displayed only at the moment of short-circuiting. *6 While controlling with the MAKE system, the level meter is switched between displayed (short-circuiting) and hidden (opening). When "LEVEL METER ch" is set to "OFF," the level meter is not displayed ("NO EFFECT" appears). While controlling with the TRIGGER system, the pattern of the audio channel display is switched. *7 While controlling with the MAKE system, the available set-up options will be the setting value currently selected in "SOURCE ID" ("ON" or "AUTO" [short-circuiting]) and "OFF" (opening). While controlling with the TRIGGER system, uses the same set-up option as those in the SETUP MENU (→ "SOURCE ID" in "INFORMATION" on page 24). *8 While controlling with the TRIGGER system, the display mode changes in the same way as for the normal SCOPE function. (→ e on page 9) While controlling with the MAKE system, the displayed (short-cirtuiting)/hidden (opening) operations are performed as follows regardless of the MAIN MENU "AUTO OFF" setting: Display [PIN 1] − [PIN 5] settings PARA.WFM PARA.VS BAL.WFM BAL.VS Priority when the settings a re configured simultaneously Invalid Wave form monitor MIX mode Parallel Valid wave form monitor Vector scope Parallel vector scope Wave form Vector monitor scope Difference Difference wave form vector monitor scope Parallel wave form monitor Wave form monitor > Vector scope > Difference wave form monitor > Parallel vector scope > Difference vector scope *9 While controlling with the MAKE system, the screen is switched between normal screen (opening) and blue screen (short-circuiting). While controlling with the TRIGGER system, the screen changes in the same way as when pressing SCREENS CHECK button (→ w on page 9). *10 Must be controlled with the TRIGGER system. The mode changes in the order of "NORMAL" → "CINEMA" → "FIELD" (This function cannot be controlled with the MAKE system). ● You cannot assign the same function to different pin terminals. ● The TRIGGER system switches each function by short-circuiting the pin terminal for about 1 second and opening it. 27