JVC FS-V100 Instruction Manual - Page 19
CD Direct Recording, Insert a CD.
View all JVC FS-V100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
CD Direct Recording Everything on the CD goes onto the tape in the order it is on the CD, or according to the order you have set in a program. 1 Insert a blank or erasable tape into the Cassette Deck. 2 Insert a CD. 3 Press the CD #/8 button. 4 Press the 7 button. • If you want to record specific tracks only, program the tracks beforehand. You can check their total playback time on the display during programing. (See page 11.) 5 If you want to record on both sides of a tape, press the REV. MODE button on the Unit until the indicator is lit. • Make sure that the recording direction for the tape and the Tape Direction indicator are correct. (See "Notes for using Reverse mode for recording" on page 14.) 6 Select whether to have pauses left between recorded selections. • If nothing is done, a non-recorded pause of about four seconds will be automatically left between selections. • If you do not want pauses left between selections, do the following before proceeding to the next step. Press the CD #/8 button twice. The CD player enters Pause mode. 7 Press the REC button on the Unit. The REC indicator lights up and the System begins recording. • When recording a CD onto tape with Reverse mode on: If a song is recorded for more than 12 seconds (which corresponds to the length of leader tape) but not finished before the first side of tape comes to an end, this song will automatically be recorded on the second side from its beginning to avoid being split on both sides. If a song is recorded for less than 12 seconds before the first side of tape comes to an end, the song preceding this song will also be recorded on the second side from its beginning as it may not be completely recorded on the first side because of leader tape. • After the CD player has played the entire CD, or all the programed tracks, the tape automatically stops. To stop at any time during the recording process, press the 7 button. The tape stops after 4 seconds. Note: When making SLEEP timer settings while doing CD Direct recording, set enough time to allow for the CD to finish playing, otherwise the power will go off before recording is completed. One track recording 1 Insert a blank or erasable tape into the Cassette Deck. 2 Play the track on the CD you wish to record. 3 Press the REC button on the Unit. The CD player returns to the beginning of that track and the track is recorded on the tape. After recording, the CD player and Cassette Deck automatically stop. EN10-22.FS-V100[J]f 15 12/12/00, 10:33 AM 15