JVC FS-V100 Instruction Manual - Page 21
Using the Timers, Setting the Daily Timer, Setting the Clock
View all JVC FS-V100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Using the Timers POWER SLEEP POWER SLEEP DISPLAY FM MODE AUTO PRESET TAPE CD AUX FM/AM CD REPEAT DISPLAY UP MODE PROGRAM SET RANDOM DOWN AHB PRO BASS TREBLE CANCEL VOLUME REMOTE CONTROL RM-SFSV10J POWER STANDBY POWER MD/ AUX REC REV MODE PHONES TAPE DOWN FM/AM CD MULTI CONTROL UP AHB PRO TIMER VOLUME CLOCK CD OPEN/CLOSE TIMER CLOCK ¢ Timer indicator ON SLEEP OFF CLOCK 4 ON time, OFF time When the System is in use, the display shows other items as well. For simplicity, only the items described in this section are shown here. The timers let you control listening and recording functions automatically. Setting the Clock • When you plug the AC power cord into the wall outlet, the CLOCK indicator flashes on the display. You can set the clock whether the System is on or off. Notes: • The clock must be correctly set for the timers to work. • The procedure must be completed within 2 minutes. Otherwise, the setting is cleared and must be repeated from the beginning. CLOCK DOWN UP or CLOCK (For 2 seconds) 1 Press the CLOCK button on the Unit for more than 2 seconds. The hour digits rapidly flash on the display. 2 Press the ¢ or 4 button to set the hour. Pressing the ¢ button moves the hour forwards and pressing the 4 button moves it backwards. Hold down the button to move the hour rapidly. 3 Press the CLOCK button. The minute digits rapidly flash on the display. 4 Press the ¢ or 4 button to set the minute. Pressing the ¢ button moves the minute forwards and pressing the 4 button moves it backwards. Hold down the button to move the minute rapidly. 5 Press the CLOCK button again. The selected time is set and the seconds start counting from 0. The CLOCK indicator remains lit on the display. CAUTION: If the System is unplugged, or a power failure occurs, the timer setting will be lost. You will need to reset the clock first, then the timer. Note: The clock may gain or lose 1 to 2 minutes per month. Setting the Daily Timer Once you have set the Daily Timer, the timer will be activated at the same time every day. It can be canceled and re-activated whenever you wish. The Timer indicator on the display shows when the Daily Timer you have set will be activated. Notes: • Finish each step within 30 seconds. Otherwise, the setting is cleared and the procedure must be repeated from the beginning. • The clock must be correctly set for the timers to work. If the clock has not been set, the CLOCK indicator will flash on the display when you press the TIMER button for more than 2 seconds, and then the display alternates between "ADJUST" and "CLOCK" for about 5 seconds. 1 Press the TIMER button on the Unit for more than 2 seconds. The ON indicator lights up, and then the current ON time flashes on the display. (Example: AM 11:00) ON SLEEP 2 Set the ON time. (Example: AM 11:15) Press the ¢ or 4 button on the Unit to set the hour you want the Unit to come on. Pressing the ¢ button moves the hour forwards and pressing the 4 button moves it backwards. Hold down the button to move the hour rapidly. Press the TIMER button to adjust the minute. ON SLEEP 3 Set the OFF time. (Example: AM 12:15) 1. Press the TIMER button on the Unit. The hour digits of the current OFF time flashes, and then the OFF indicator lights up on the display. SLEEP OFF 2. Press the ¢ or 4 button on the Unit to set the time you want the Unit to be turned off. Pressing the ¢ button moves the hour forwards and pressing the 4 button moves it backwards. Hold down the button to move the hour rapidly. Press the TIMER button again to adjust the minute. SLEEP OFF 17 EN10-22.FS-V100[J]f 17 12/12/00, 10:33 AM