JVC G310 Instruction Manual - Page 28

ENGLISH More about this receiver Basic operations Turning off the power • If you turn off the power while listening to a disc, disc play will start from where playback has been stopped previously, next time you turn on the power. Selecting the sources • When no disc is loaded in the receiver, "CD" cannot be selected. • Without connecting to the SIRIUS radio or CD changer, "SIRIUS" or "CD-CH" cannot be selected. Tuner operations Storing stations in memory • During SSM search... - All previously stored stations are erased and stations are stored newly. - Received stations are preset in No. 1 (lowest frequency) to No. 6 (highest frequency). - When SSM is over, the station stored in No. 1 will be automatically tuned in. • When storing a station manually, a previously preset station is erased when a new station is stored in the same preset number. Disc operations General • This receiver has been designed to reproduce CDs/CD Texts, and CD-Rs (Recordable)/ CD-RWs (Rewritable) in audio CD (CD-DA), MP3 and WMA format. • When a disc has been loaded, selecting "CD" for the playback source starts disc play. Playing a disc • While fast-forwarding or reversing on an MP3 or WMA disc, you can only hear intermittent sounds. Playing a CD-R or CD-RW • Use only "finalized" CD-Rs or CD-RWs. • This receiver can play back only the files of the same type which is first detected if a disc includes both audio CD (CD-DA) files and MP3/WMA files. • This receiver can play back multi-session discs; however, unclosed sessions will be skipped while playing. • Some CD-Rs or CD-RWs may not play back on this receiver because of their disc characteristics, and for the following causes: - Discs are dirty or scratched. - Moisture condensation occurs on the lens inside the receiver. - The pickup lens inside the receiver is dirty. - CD-R/CD-RW on which the files are written with "Packet Write" method. - There are improper recording conditions (missing data, etc.) or media conditions (stain, scratch, warp, etc.). • CD-RWs may require a longer readout time since the reflectance of CD-RWs is lower than that of regular CDs. • Do not use the following CD-Rs or CD-RWs: - Discs with stickers, labels, or protective seal stuck to the surface. - Discs on which labels can be directly printed by an ink jet printer. Using these discs under high temperatures or high humidity may cause malfunctions or damage to discs. Inserting a disc • When a disc is inserted upside down, the disc automatically ejects. • Do not insert 8 cm discs (single CD) and unusual shape discs (heart, flower, etc.) into the loading slot. 28