JVC GD-463D10U Instruction Manual - Page 16

Configuring your remote control You can configure your monitor's remote control to operate your other devices. Configure your remote control. 1 Turn on the device manually. 2 Switch the remote control mode to a mode that matches your device. Refer to the table below to select an appropriate mode. TV STB AUDIO DVD z The indicator lights for 3 seconds each time the remote control is operated. 3 Find the remote control code for your JVC device from the table below. MODE Applicable devices Remote control codes TV This monitor only STB Not in use DVD DVD DVD/DVD-R 0503, 0539, 0623, 1241, 1550, 1602, 1701, 1860, 1863, 1940 1164, 1275, 1597 Home Theater in Box 0623, 1701, 1860, 1863, 1940 LCD AUDIO Receiver/Home Theater in Box 0074,1374,1676, 2000, 2001 15 4 Set the remote control code. Press and hold Enter four digit number Release the button 5 Point the remote control at your device, press and confirm that your device is turned off. If your device does not respond, try entering another available code. Note z If none of the code works, refer to "Using the search code function" (P. 16).