JVC GD-463D10U Instruction Manual - Page 17

IMPORTANT PREPARE USE Using the search code function This function searches through the codes one by one, beginning from the first code in the list. 1 Turn on the device manually. 2 Switch the remote control mode to a mode that matches your device. Press to select the mode. 3 Activate the search code function. Hold down and until the mode indicator blinks. 4 Point the remote control at your device and press . If there is no response, try the next code by pressing and press again. Repeat the process until your device turns off. TOP MENU DISPLAY MODE 5 Press to register the code. The code is now set. Confirm that the mode indicator goes out. Ⅵ If your monitor's remote control still does not work even after using the search code function, use your device's own remote control. Some models of JVC devices cannot be operated with this remote control. LCD VOL VOL VOL VOL Button functions Ⅵ Change the remote control mode Ⅵ Turn on/off the device Ⅵ Navigate the menus Select OK Display top DISPLAY menu Display menu Back to previous menu Ⅵ Playback / Record, etc. Select a MODE chapter Play Forward Stop Rewind Pause Record Ⅵ Mute g Press " " Ⅵ Volume g Press " " Ⅵ Select a surround mode g Press " " z Depending on your device, some functions may not be operable with this remote control. SETTING TROUBLE? 16