JVC GD-463D10U Instruction Manual - Page 9

Attach the stand to the monitor, Handling the glossy finish of the monitor

Page 9 highlights

IMPORTANT PREPARE Attach the stand to the monitor 1 Note z When the stand is not used: Seal up the two holes at the bottom of the TV using the plates provided. Peel off the protection films on the plates. Then peel the plates from the paper and stick them on the holes. To prevent scratches on the panel, lay a piece of soft cloth on an even platform and place the monitor onto it. 2 Handling the glossy finish of the monitor Be careful when handling the glossy finish of the monitor The glossy finish of the monitor scratches easily. z Protection films have been pasted onto the glossy finish of the monitor to prevent scratches. Peel off the films after the monitor has been placed properly. z If the glossy finish gets dirty, clear the dust off the glossy finish first. Then wipe softly with the cleaning cloth provided. If you do not clear the dust first, or you wipe the glossy finish too hard, or a cleaning cloth other than the one provided is used, the glossy finish may be scratched. Glossy finish USE SETTING TROUBLE? 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

8
USE
SETTING
TROUBLE?
PREPARE
IMPORTANT
To prevent scratches on the panel, lay a piece of soft cloth on an even
platform and place the monitor onto it.
When the stand is not used:
Seal up the two holes at the bottom of the TV using
the plates provided. Peel off the protection films on
the plates. Then peel the plates from the paper and
stick them on the holes.
Be careful when handling the glossy finish of the monitor
The glossy finish of the monitor scratches easily.
Protection films have been pasted onto the glossy finish of the monitor to
prevent scratches. Peel off the films after the monitor has been placed
properly.
If the glossy finish gets dirty, clear the dust off the glossy finish first. Then
wipe softly with the cleaning cloth provided. If you do not clear the dust
first, or you wipe the glossy finish too hard, or a cleaning cloth other than
the one provided is used, the glossy finish may be scratched.
Attach the stand to the monitor
1
2
Handling the glossy finish of the monitor
Note
Glossy finish