JVC GM-552DU Instruction Manual - Page 10

Installation Precautions • When installing the monitor on the wall, consult your dealer. • Route the power cord and connection cables along the floor corners to avoid walking on them. • For good heat dissipation, try to leave the following distance of space (minimum) around the monitor (see diagram below). • When installing the monitor near the ceiling or similar location, the remote control may not work correctly because of possible effects, such as reflections, from the surroundings. If this happens, move the monitor where it is free from these effects. • The ambient temperature of the installation place should be within the range of 0°C to 40°C (32°F to 104°F)(slightly variable depending on the ambient conditions of the installation place). • Do not install the monitor in such a way that the monitor and other AV equipment affect each other adversely. (For example, if a disturbed image or noise due to electromagnetic interference occurs, or if the infrared remote control malfunctions, change the installation place.) When installing the monitor on the supplied stand Front view Side view Unit: mm (inch) When installing the monitor vertically • Make sure to install the monitor in the direction illustrated below. • You can change the position of the JVC logo plate. Remove the sealing sticker on the place for the logo plate and fix the plate with the screws. Place for the logo plate - 9 -