JVC GM-552DU Instruction Manual - Page 19

OSD Menu (cont.) ASPECT SETTING Press MENU button to select the sub-menu. 1.Press Up / Down buttons to select an icon 2.Press MENU button to enter 3.Press Up / Down buttons to adjust value 4.Press MENU button to return 5.Return to MAIN MENU by EXIT ASPECT : Select aspect mode. (FULL / REGULAR / REAL DOT) FULL : Displays in full area. REGULAR : Displays the regular size. REAL DOT : Displays by the original resolution. *When the resolution of input signal is bigger than the panel pixell, don't display. EXIT : Press MENU button to return to the main menu. (To fix, must finish by EXIT menu.) IMAGE ADJUST (RGB only) 1.Press Up/Down buttons to select an icon 2.Press MENU button to enter 3.Press Up/Down buttons to adjust value 4.Press MENU button to return 5.Return to MAIN MENU by EXIT AUTO ADJUST : Press MENU buttons to adjust automatically H-Position,V-Position, Phase, Clock. H- POSITION : Adjust the "horizontal position" Value 00 - 100. V- POSITION : Adjust the "vertical position" Value 00 - 100. PHASE : Adjust the "PHASE" value 00 - 100. CLOCK : Adjust the "CLOCK" value 00 - 100. EXIT : Press MENU button to return to the main menu. (To fix, must finish by EXIT menu.) * May not be able to select value until 100 in a few kind of signals. INFORMATION Press MENU button to get the timing information. - 18 -