JVC GM-552DU Instruction Manual - Page 23

OSD Menu (cont.) SETUP MENU 1.Press Up/Down buttons to select an icon 2.Press MENU button to enter 3.Press Up/Down buttons to adjust value 4.Press MENU button to return 5.Return to MAIN MENU by EXIT OSD TIMER : Adjust the "OSD TIMER" value 5 sec- 30 sec. GREEN MODE : Select "GREEN MODE" function OFF/ 5 min - 10 min. The Luminance of back-light reduce to 80 % after 5 min - 10 min. Press any buttons, release GREEN MODE. IMAGE REFRESH : Select "IMAGE REFRESH" function ON / OFF. The horizontal black bar scrolls below from the top every an hour. This function will protect against the ghost. ECO SENSOR : Select "ECO SENSOR" function ON / OFF. Adjust the brightness of the screen automatically according to the brightness of the room. *When select ECO SENSOR, GREEN MODE become to OFF. ID NUMBER : Select "ID NUMBER " 01 - 99". This number is used by the specified adjustment with IR remote control. Can control a only target monitor in many monitors.. *Example for using the specified adjustment with IR remote control. 1. Set ID number "05" in this menu. 2. Press "ID-ON" by IR remote control. ID number "ID: 05" displays on blue back color. You can't operate remote control except number button in this time. 3. Press button "0" + "5" + "MENU" by IR remote control. Back color of ID number changes orange. In this time, can operate usually by remote control. Press the other number, can't operate and back color become blue. 4. If press "ID-OFF", release the specified adjustment. - 22 -