JVC GR-D350 Instruction Manual - Page 16
Tripod Mounting, Loading/Unloading A Cassette - windows 7
UPC - 046838023248
View all JVC GR-D350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
16 EN GETTING STARTED Tripod Mounting To attach the camcorder to a tripod, align the direction stud and screw to the mounting socket and stud hole on the camcorder. Then tighten the screw clockwise. ● Some tripods are not equipped with studs. Loading/Unloading A Cassette The camcorder needs to be powered up to load or eject a cassette. OPEN/EJECT PUSH Cassette holder cover Slide the erase protection tab on the back of the tape in the direction of "SAVE". This prevents the tape from being recorded over. To record on this tape, slide the tab back to "REC" before loading it. NOTES: ● If you wait a few seconds and the cassette holder does not open, close the cassette holder cover and try again. If the cassette holder still does not open, turn the camcorder off then on again. ● If the tape does not load properly, open the cassette holder cover fully and remove the cassette. A few minutes later, insert it again. ● When the camcorder is suddenly moved from a cold place to a warm environment, wait a short time before opening the cassette holder cover. Cassette holder Make sure the window side is facing out. Erase protection tab 1 Slide and hold OPEN/EJECT in the direction of the arrow, then pull the cassette holder cover open until it locks. The cassette holder opens automatically. ÷ Do not touch internal components. 2 Insert or remove a tape and press "PUSH" to close the cassette holder. ÷ Be sure to press only the section labelled "PUSH" to close the cassette holder; touching other parts may cause your finger to get caught in the cassette holder, resulting in injury or product damage. ÷ Once the cassette holder is closed, it recedes automatically. Wait until it recedes completely before closing the cassette holder cover. ÷ When the battery pack's charge is low, you may not be able to close the cassette holder cover. Do not apply force. Replace the battery pack with a fully charged one or use AC power before continuing. 3 Close the cassette holder cover firmly until it locks into place. To protect valuable recordings