JVC GY-DV5000U DR-DV5000U DV Video Disk Recorder 44 page instruction manual - Page 10

FireStore DR-DV5000 to any DV video device such as a mixer, camcorder or deck. Use FireStore's random access capabilities to navigate quickly from clip to clip without having to spool forward and backward through tape. Use FireStore DR-DV5000's trick playback modes such as multi-speed fast forward, incremental 1 frame per second slow motion and reverse play to present DV video in industrial, presentation or scientific applications. MOUNTING TO A CAMCORDER The FireStore DR-DV5000 is designed to mount directly to full size JVC Professional DV camcorders. When mounted to JVC GY-DV5000/ 5000E/ 5001 camcorders, the DR-DV5000 "hooks" to the rear of the camcorder in the usual position of the battery. These camcorders and DR-DV5000 also feature a 52-pin connector that allows unique communication between both devices. To mount to a Professional DV series camcorder, do the following: 1) Remove and disconnect the attached battery system from the camcorder. Consult either your camcorder's documentation or documentation from your battery system for more detailed information on removing the battery system. Leave the rubber gasket that was between the camcorder and battery system in place. FireStore DR-DV5000 User Guide 2) If you are using a JVC GY-DV500, 550 or 700, you will first need to add the supplied adapter plate to the rear of your camcorder (this plate will allow the DR-DV5000 to "hook" to the back of your camcorder.) Use the supplied four screws to mount. GYDV5000 series camcorder owners can ignore this step. PAGE 9 3) DR-DV5000 features a two wire connector with black and red cables that connects main power between the DR-DV5000 and the camcorder. Connect this to the equivalent connector on the rear of your camcorder.