JVC GY-DV5100U Instruction Manual - Page 15

2. CONTROLS, INDICATORS AND CONNECTORS q we EDITSEARCH FILTER 1 3200K 2 5600K 1/8 ND .3 5600K .4 5600K 1/64 ND SHUTTER STATUS MONITOR MENU AUTO IRIS FULL AUTO BACK L NORMAL SPOT L BLACK LOLUX STRETCH NORMAL COMPRESS MODE VTR CAM POWER VTR ON OFF OPEN CH-1 AUDIO LEVEL CH-2 LCD BRIGHT FRONT REAR CH-1 CH-2 AUDIO INPUT AUDIO SELECT CH-1 CH-2 AUTO MANUAL DISPLAY PULL OPEN yu rt CH-1 AUDIO LEVEL CH-2 LCD BRIGHT FRONT REAR CH-1 CH-2 AUDIO IN AUDIO SELECT CH-1 CH-2 AUTO MANUAL DISPLAY PULL OPEN i o 1 Monitoring speaker In the Camera mode, the input sound can be EE monitored. In the VTR mode, the speaker outputs the VTR playback sound. The sound to be output is selected with the MONITOR SELECT switch C on page 16. ● The sound level is adjusted with the MONITOR sound level button 1 on page 12. The sound from this speaker is not output if an earphone is plugged into the PHONES jack 5 on page 19. This speaker also outputs various warning sounds superimposed on other sound. ☞ See "Alarm Sounds" on page 98. 2 LCD door LCD monitor door. The LCD monitor is located on the inner side of the door. The LCD monitor can be viewed when this door is opened. The door can be turned to change the orientation of the LCD monitor, and it can be rotated so that it can be accommodated in the main body of the camera. ☞ See page 42. 3 LCD door lock and release knob To open the LCD door, move this knob in the direction toward the rear section. 4 [LCD BRIGHT +/-] LCD brightness +/- button This button is for adjusting the brightness of the LCD monitor display. ● Pushing the button in the + direction makes the monitor brighter. ● Pushing the button in the - direction makes the monitor darker. ● Pushing the +/− buttons simultaneously returns the setting to the standard setting. 5 [DISPLAY] Display button This button is for turning the LCD monitor display ON/OFF and selecting the display mode. When this button is pressed for a long time, the LCD monitor display is turned ON or OFF. Each time this button is briefly pressed while the LCD monitor display is turned on, the display mode changes as shown in the following. Only image displayed → Characters shown enlarged ↑ Image and characters displayed ← 6 [CH-1 AUDIO LEVEL] CH-1 audio level control Adjust the audio level of the CH-1 audio channel with this control. ● To use this control, set the CH-1 AUDIO SELECT switch 8 to "MANUAL". This control works regardless of the setting of CH1 FRONT VR item on the AUDIO/VIDEO menu screen. To use this control, set the AUDIO LEVEL CH-1 control switch on the front section (7 on page 10) to the maximum (10) position, or set the CH1 FRONT VR item on the AUDIO/VIDEO menu screen to "DISABLE". 7 [CH-2 AUDIO LEVEL] CH-2 audio level control Adjust the audio level of the CH-2 audio channel with this control. ● This control is valid only when the CH-2 AUDIO SELECT switch 9 is set to "MANUAL". 8 [CH-1 AUDIO SELECT] CH-1 audio selector switch This switch is used to select the method for adjusting the audio level of the CH-1 audio channel. AUTO : When audio at maximum volume is input, a limiter activates to suppress the audio level. The audio level does not increase when the input level is low. MANUAL : The audio level can be adjusted with the CH-1 AUDIO LEVEL control 6 or the AUDIO LEVEL CH-1 control 7 on page 10. To use the AUDIO LEVEL CH-1 control on the front section, the CH1 FRONT VR item on the AUDIO/VIDEO menu screen should be set to "ENABLE". 9 [CH-2 AUDIO SELECT] CH-2 audio selector switch This switch is used to select the method for adjusting the audio level of the CH-2 audio channel. AUTO : When audio at maximum volume is input, a limiter activates to suppress the audio level. The audio level does not increase when the input level is low. MANUAL : The audio level can be adjusted with the CH-2 AUDIO LEVEL control 7. 15