JVC GY-HM650U Operation manual for the GY-HM650U (168 pages) - Page 102

TC/UB Menu

Page 102 highlights

Menu Display and Detailed Settings Clear Paint After AWB For specifying whether to clear the [AWB Paint] (R value and B value) settings after executing AWB (Auto White Balance).  On: Sets the [AWB Paint] (R value and B value) settings to "0" after executing AWB (Auto White Balance).  Off: Does not change the [AWB Paint] (R value and B value) settings after executing AWB (Auto White Balance). [Setting Values: ROn, Off] FAW Paint For adjusting the R (red)/B (blue) component during FAW (Full Auto White Balance) mode.  Increase the number: Strengthens the red/blue.  Decrease the number: Weakens the red/blue. [Setting Values: ­32 to +32 (R 0)] TC/UB Menu Menu screen for setting time code and user's bit. This item cannot be selected in the Media mode, or during recording. TC Generator For setting the operation of the time code.  Free Run(Ext): External time code input will be synchronized with this and the time code will be recorded.  Free Run: The time code operates in the run mode at all times regardless of the recording status. It continues to run even when the power of the camera recorder is turned off.  Rec Run: The time code operates in the run mode during recording. It continues to run in the order of the recorded clips as long as the SD card is not replaced. If the SD card is removed and recording is made on another card, time code will be recorded on the new card from where it was left off in the previous card.  Regen: The time code operates in the run mode during recording. When the SD card is replaced, the last time code recorded on the card is read and recorded on a new card so that the time code continues in running order. [Setting Values: Free Run(Ext), Free Run, RRec Run, Regen] TC Preset For setting the time code (hour, minute, second, frame). Display : Drop setting 02:02:25.20 : Non Drop setting 02:02:25:20 UB Preset For setting the user's bit. (Digit by digit) Display : AB CD EF 01 Drop Frame For setting the framing mode of the time code generator.  Non Drop: Internal time code generator works in the non­ drop­frame mode. Use this setting when placing emphasis on the number of frames.  Drop: Internal time code generator works in the drop­ frame mode. Use this setting when placing emphasis on the recording time. [Setting Values: Non Drop, RDrop] Memo :  This item can be set only when [Main Menu]- [System]-[Record Set]-[Record Format]- [ Frame & Bit Rate] is set to "60p", "30p", or "60i". When the frame rate is "24p", "Non Drop" becomes fixed and cannot be selected. When the frame rate is "50p", "25p", or "50i", this item appears as "­­­" and cannot be selected. (' P112 [ Frame & Bit Rate ] ) 102

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168

Clear Paint After AWB
For specifying whether to clear the [AWB Paint] (R
value and B value) settings after executing AWB
(Auto White Balance).
On:
Sets the [AWB Paint] (R value and B value)
settings to “0” after executing AWB (Auto White
Balance).
Off:
Does not change the [AWB Paint] (R value and
B value) settings after executing AWB (Auto
White Balance).
[Setting Values:
R
On, Off]
FAW Paint
For adjusting the R (red)/B (blue) component
during FAW (Full Auto White Balance) mode.
Increase the number:
Strengthens the red/blue.
Decrease the number:
Weakens the red/blue.
[Setting Values:
±
32 to +32 (
R
0)]
TC/UB Menu
Menu screen for setting time code and user’s bit.
This item cannot be selected in the Media mode,
or during recording.
TC Generator
For setting the operation of the time code.
Free Run(Ext):
External time code input will be synchronized
with this and the time code will be recorded.
Free Run:
The time code operates in the run mode at all
times regardless of the recording status. It
continues to run even when the power of the
camera recorder is turned off.
Rec Run:
The time code operates in the run mode during
recording. It continues to run in the order of the
recorded clips as long as the SD card is not
replaced. If the SD card is removed and
recording is made on another card, time code
will be recorded on the new card from where it
was left off in the previous card.
Regen:
The time code operates in the run mode during
recording. When the SD card is replaced, the
last time code recorded on the card is read and
recorded on a new card so that the time code
continues in running order.
[Setting Values: Free Run(Ext), Free Run,
R
Rec
Run, Regen]
TC Preset
For setting the time code (hour, minute, second,
frame).
Display
:
Drop setting 02:02:25.20
:
Non Drop setting 02:02:25:20
UB Preset
For setting the user’s bit. (Digit by digit)
Display
:
AB CD EF 01
Drop Frame
For setting the framing mode of the time code
generator.
Non Drop:
Internal time code generator works in the non
±
drop
±
frame mode. Use this setting when placing
emphasis on the number of frames.
Drop:
Internal time code generator works in the drop
±
frame mode. Use this setting when placing
emphasis on the recording time.
[Setting Values: Non Drop,
R
Drop]
Memo :
This item can be set only when [Main Menu]
[System]
[Record Set]
[Record Format]
[
Frame & Bit Rate] is set to “60p”, “30p”, or
“60i”. When the frame rate is “24p”, “Non Drop”
becomes fixed and cannot be selected. When
the frame rate is “50p”, “25p”, or “50i”, this item
appears as “
±±±
” and cannot be selected.
(
P112 [
Frame & Bit Rate ] )
102
Menu Display and Detailed Settings