JVC GY-HM650U Operation manual for the GY-HM650U (168 pages) - Page 62
Monitoring Audio Sound During Recording Using a Headphone
![]() |
View all JVC GY-HM650U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Shooting Monitoring Audio Sound During Recording Using a Headphone You can check the recorded audio using headphone. 1 AUX 23 MONITOR CH1 BOTH CH2 Selecting Audio Output Method When the [MONITOR] Selection Switch Is Set to "BOTH" When a stereo type earphone jack is connected, perform the following setting to output stereo sound. Set the [MONITOR] selection switch to "BOTH". Set [Main Menu]-[A/V Set]-[Audio Set]-[Monitor] to "Stereo". (' P109 [ Monitor ] ) Memo : You can set the volume of the warning tone in [Main Menu]-[A/V Set]-[Audio Set]-[Alarm Level]. ("Off"/"Low"/"Middle"/"High") (' P109 [ Alarm Level ] ) . Connect the headphone. Select the channel to monitor with the [MONITOR] selection switch. Setting Description [CH1] Outputs the audio recorded in [CH1]. [BOTH] Outputs the audio recorded in [CH1/CH2]. [CH2] Outputs the audio recorded in [CH2]. Use the [MONITOR +/] button to adjust the monitor volume. Memo : Audio during recording is not output from the monitor speaker. Warning tone is output when there is an abnormality in the camera recorder or when the battery is low. (' P160 [Warning Tone] ) 62
![](/manual_guide/products/jvc-gyhm650u-operation-manual-gyhm650u-168-pages-d0bd557/62.png)