JVC GY-HM650U Operation manual for the GY-HM650U (168 pages) - Page 77
Clip Continuous Rec, Set Rec Mode to Clip Continuous.
View all JVC GY-HM650U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Shooting Set [Rec Mode] to "Pre Rec". (' P113 [ Rec Mode ] ) Set [Main Menu]-[System]-[Record Set]-[Rec Mode] to "Pre Rec". The display changes ("STBY"-"STBYP"). Press the [REC] button to start recording in Pre Rec mode. The display changes ("STBYP"- "RRECP") and the card slot status indicator lights up in red. Press the [REC] button again to pause recording. The display changes ("RRECP" -"STBYP") and the card slot status indicator lights up in green. Caution : When the interval between start and stop recording is short, "STBYP" may not be displayed immediately after recording is complete. "RRECP"-"STBYP" ("STBY" blinks in red) -"STBYP" is displayed. When the SD card becomes full during recording, recording stops and "STOP" is displayed. Video and audio before the above mentioned time may not be recorded after recording starts in the following cases. Immediately after power on Immediately after recording stops Immediately after switching from Media mode to Camera mode Immediately after setting [Rec Mode] Immediately after the end of Clip Review Immediately after changing file format Immediately after changing video format Clip Continuous Rec In normal recording, when the recording stops, the image, audio, and accompanying data from the start till the end of the recording are recorded as one "clip" on the SD card. This mode allows you to consolidate several rounds of "startstop recording" into one clip. Example: In normal recording, three clips are generated as Recording 1, Recording 2, and Recording 3. However, recording in this mode generates only one clip. Press [REC] Press [REC] (Recording starts) (Recording resumes) Press [REC] (Recording resumes) Press [REC] Press [REC] Press and hold [REC] (Recording pauses) (Recording pauses) (Recording stops) Recording 1 Recording 2 Recording 3 Completed Clip (Recorded video and audio) Recording 1 Recording 2 Recording 3 . Set "Rec Mode" to "Clip Continuous". (' P113 [ Rec Mode ] ) Set [Main Menu]-[System]-[Record Set]-[Rec Mode] to "Clip Continuous". The display changes ("STBY"-"STBYC"). Start recording. (Recording 1) Press the [REC] button to start recording in Clip Continuous mode. The display changes ("STBYC"- "RRECC") and the card slot status indicator lights up in red. Pause recording. Press the [REC] button again to pause recording. The display changes ("RRECC" -"STBYC" (yellow text)). The card slot status indicator remains lighted in red. Memo : When the [CANCEL] button is pressed while the camera recorder is paused (STBYC), the display changes ("STBYC" (yellow text) - "STBYC" (blinking yellow text) -"STBYC" (white text)), and a "clip" is generated. The card slot status indicator lights up in green. Resume recording. (Recording 2) Press the [REC] button again to resume recording. The display changes ("STBYC" (yellow text) -"RRECC"). The card slot status indicator remains lighted in red. 77