JVC GZ-MG20 Instruction Manual - Page 8
Attaching the Shoulder Strap, Attaching the Lens Cap, GETTING STARTED
View all JVC GZ-MG20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
8 EN GETTING STARTED Attaching the Shoulder Strap Follow the illustration. 1 Open the velcro strip. 2 Thread the strap through the eyelet. 3 Fold it back and thread it through the strap guide and the buckle. ● To adjust the length of the strap, loosen and then tighten the strap in the buckle. 4 Slide the strap guide fully towards the eyelet. 5 Close the velcro strip. Attaching the Lens Cap To protect the lens, attach the provided lens cap to the camera as shown in the illustration. NOTE: To confirm the lens cap is on correctly, make sure the cap is flush to the camera. 1 2 Eyelet 3 Strap Guide 5 4 Place here during recording. Buckle
8
EN
GETTING STARTED
Attaching the Shoulder Strap
Follow the illustration.
1
Open the velcro strip.
2
Thread the strap through the eyelet.
3
Fold it back and thread it through the strap
guide and the buckle.
●
To adjust the length of the strap, loosen and then
tighten the strap in the buckle.
4
Slide the strap guide fully towards the eyelet.
5
Close the velcro strip.
Attaching the Lens Cap
To protect the lens,
attach the provided lens
cap to the camera as
shown in the illustration.
NOTE:
To confirm the lens cap is
on correctly, make sure the
cap is flush to the camera.
1
4
5
2
3
Strap Guide
Buckle
Eyelet
Place here during
recording.