JVC GZ-MS120BU Instructions - Page 15
Necessary Settings before Use - charging cable
UPC - 046838037719
View all JVC GZ-MS120BU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
GETTING STARTED Necessary Settings before Use Charging the Battery Pack 1 Close the LCD monitor to turn off the camcorder. 2 Attach the battery pack, then connect the AC adapter. • With the "v" (arrow) on the battery pack pointing at the correct direction, slide the battery pack until it locks in place. DC Jack - To check the remaining battery power See page 21. - Required charging/recording time (approx.) *When the LED light is off and the monitor backlight is set to [STANDARD] mode. Battery pack Charging time Recording time BN-VF808U (Provided) 1 hr. 50 min. 2 hr. 45 min.* BN-VF815U 2 hr. 40 min. 5 hr. 25 min.* BN-VF823U 3 hr. 40 min. 8 hr. 10 min.* - To detach the battery pack v Arrow DC AC Adapter To AC Outlet (110V to 240V) • The power/charge lamp blinks to indicate charging has started. • When the lamp goes out, charging is finished. NOTE • You can also use the camcorder with just the AC adapter. • The actual recording time may shorten depending on the recording environment, such as when recording scenes with fast moving subject. • Please do not pull or bend the AC adapter plug and cable. This may damage the AC adapter. EN15