JVC HD10U JY-HD10U User Manual (92 pages, 5964KB) - Page 54

54 EN DUBBING Dubbing To Or From A VCR Connector Cover** To AV S/AV/Editing cable (provided) 1234 5 TV VCR A Not required for connection. B To S-VIDEO* IN or OUT C Yellow to VIDEO IN or OUT D White to AUDIO L IN or OUT E Red to AUDIO R IN or OUT * Connect when your TV/VCR has an S-VIDEO IN/OUT connector. In this case, it is not necessary to connect the yellow video cable. ** When connecting the cable, open the cover. To use this camcorder as a player 1 Following the illustrations, connect the camcorder and the VCR. Also refer to page 26. 2 Set the camcorder's Playback Mode Switch to "VIDEO". 3 Set the camcorder's Power Switch to "P" while pressing down the Lock Button located on the switch. 4 Turn on the VCR's power. 5 Insert the source cassette in the camcorder. 6 Insert the recording cassette in the VCR. 7 Engage the VCR's AUX and Record-Pause modes. ● Refer to the instruction manual for the VCR. 8 Press 4·9 on the camcorder to start playback of the source tape. 9 At the point you want to start dubbing, engage the VCR's Record mode. 10 To pause dubbing, engage the VCR's Record- Pause mode and press 4·9 on the camcorder. 11 Repeat steps 8 - 10 for additional editing. Stop the VCR and camcorder. NOTES: ● It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack. (੬ pg. 13) ● As the camcorder starts to play your footage, it will appear on your TV. This will confirm the connections and the AUX channel for dubbing purposes. ● Before you start dubbing, make sure that the indications do not appear on the connected TV. If they do, they are being recorded onto the new tape. To choose whether or not the following displays appear on the connected TV... • Date/time Set "DATE/TIME" to "AUTO", "ON" or "OFF". (੬ pg. 35, 42) Or, press DISPLAY on the remote control to turn on/off the date indication. • Time code Set "TIME CODE" to "OFF" or "ON". (੬ pg. 35, 42) • Indications other than date/time and time code Set "ON SCREEN" to "OFF", "LCD" or "LCD/ TV". (੬ pg. 35, 42) • Playback images recorded in HD or SD mode with this camcorder will be converted to DV format (480i) image. To use this camcorder as a recorder 1) Perform steps 1 to 3 in the left column. 2) Set "S/AV INPUT" to "A/V IN". (੬ pg. 35, 41) ● If your VCR has an S-VIDEO OUT connector, set "S/AV INPUT" to "S IN". 3) Set "REC MODE" to "SP" or "LP". (੬ pg. 35, 36) 4) Insert the recording cassette in this camcorder. 5) Press the Recording Start/Stop Button to engage the Record-Pause mode. The " A/V IN " or " S IN " indication appears on the screen. 6) Press the Recording Start/Stop Button to start recording. The indication rotates. 7) Press the Recording Start/Stop Button again to stop recording. The indication stops rotating. NOTES: ● After dubbing, set "S/AV INPUT" back to "OFF". ● Analog signals can be converted to digital signals with this procedure. ● It is also possible to dub from another camcorder. ● Depending on the tape source input, images may appear with horizontal jitter on the camcorder's LCD monitor and viewfinder during dubbing. This does not affect the actual recording.