JVC HD10U JY-HD10U User Manual (92 pages, 5964KB) - Page 68
Using The Camcorder As A WebCam, SYSTEM CONNECTIONS cont.
UPC - 046838007668
View all JVC HD10U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
68 EN Using The Camcorder As A WebCam This camcorder can be used as a WebCam via USB connection. To USB Connector Cover* USB cable (provided) To USB connector SYSTEM CONNECTIONS (cont.) 1 Make sure all necessary software (provided) are installed in your PC. 2 Set the Recording Mode Switch to "MEMORY". 3 Set the Power Switch to "A" or "M" while pressing down the Lock Button located on the switch. 4 Connect the camcorder to your PC using the USB cable. ● " " appears on the screen. ● If the PC is not powered on, the camcorder does not enter the Web Camera mode. 5 When finished, turn off the PC first, then the camcorder. Disconnect the USB cable from the camcorder and PC. NOTES: ● It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack. (੬ pg. 13) ● You can also use the camcorder for video conference over the Internet by using Microsoft Windows® Messenger®. For details, refer to the instruction manual of the provided software. ● In the Web Camera mode, the following buttons cannot be operated: SNAPSHOT, INDEX, NAVI, NAVI STORE, the Recording Start/Stop Button. Refer to the instruction manuals of the PC and provided Software. USB-equipped PC * When connecting the cable, open the cover.