JVC HD10U JY-HD10U User Manual (92 pages, 5964KB) - Page 72
TROUBLESHOOTING cont., Advanced features
UPC - 046838007668
View all JVC HD10U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
72 EN Advanced features TROUBLESHOOTING (cont.) SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 15. The focus does not adjust automatically. 15. • Focus is set to the Manual mode. • The recording was done in a dark place, or the contrast was low. • The lens is dirty or covered with condensation. 15. • Set Focus to the Auto mode. (੬ pg. 46) • Clean the lens and check the focus again. (੬ pg. 81) 16. In the 5-Second mode, recording ends before 5 seconds have elapsed. 16. • The 5-Second mode is set to 16. • Set "5S" to "5S" in MANUAL "Anim." in MANUAL Menu. Menu. (੬ pg. 35, 37) 17. Snapshot mode cannot be used. 17. • The Squeeze mode (16:9SQ) 17. • Disengage the Squeeze is selected. (16:9SQ) mode. (੬ pg. 35, 38) 18. The color of Snapshot looks strange. 18. • The light source or the 18. • Find a white subject and subject does not include compose your shot so that it white. Or there are various also appears in the frame. different light sources behind (੬ pg. 28, 44) the subject. • Disengage the Sepia (SEPIA) • The Sepia (SEPIA) or and Monotone Monotone (MONOTONE) (MONOTONE). (੬ pg. 35, mode is activated. 51) 19. The image taken using Snapshot is too dark. 19. • Shooting was performed under backlit conditions. 19. • Press BACK LIGHT. (੬ pg. 45) 20. The image taken using Snapshot is too bright. 20. • The subject is too bright. 20. • Press P.AE and set "PROGRAM AE" to "SPOTLIGHT". (੬ pg. 50) 21. White Balance cannot be activated. 21. • The Sepia (SEPIA) or Monotone (MONOTONE) mode is activated. 21. • Disengage the Sepia (SEPIA) or Monotone (MONOTONE) mode before setting White Balance. (੬ pg. 51) 22. Wipe/Fader effects do not work. 22. • The Power Switch is set to "A". 22. • Set the Power Switch to "M". (੬ pg. 16) 23. The Black & White Fader does 23. • The Sepia (SEPIA) or not work. Monotone (MONOTONE) mode is activated. 23. • Disengage the Sepia (SEPIA) and Monotone (MONOTONE). (੬ pg. 35, 51) 24. Program AE does not work. 24. • The Power Switch is set to "A". 24. • Set the Power Switch to "M". (੬ pg. 16) 25. Cannot record signals from a device which is connected to the i.LINK IN/OUT connector. 25. • The connected device is not compatible with this camcorder. 25. • Dubbing from other devices in MPEG2 format is possible if the connected device is another same model of this unit. It is also possible to dub in MPEG2 format from a DVHS VCR, if the source tape (D-VHS) has been originally dubbed from this digital HD video camera in MPEG2 format.