JVC HR-S5900U Instructions - Page 21

Basic Playback And Recording - svhs et

Page 21 highlights

BASIC PLAYBACK AND RECORDING Basic Playback Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV. POWER 2 JOG dial POWER S VIDEO VIDEO (MONO)L-AUDIO-R REC LINK S-VHS ET A.DUB INSERT PLAY REW - FF + CH- /+ PUSH / TURN 24HR QUICK PROGRAM REC PAUSE STOP/EJECT STOP/EJECT ( 7 / 0 ) POWER 1 2 3 2 4 5 6 7 8 9 0 4 2 1 REW ( 1 ) FF ( ¡ ) 3 STOP ( 7 ) EN 21 This VCR can check the tape condition during playback 1(and recording), and realizes the best possible pictures. Load a cassette Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointing towards the VCR. Do not apply too much pressure when inserting. ● The VCR turns on automatically. ● The counter is automatically reset to "0:00:00". ● If the cassette's record safety tab has been 2 removed, playback begins automatically. Start playback Press PLAY ( 3 ). ● Tape speed (SP or EP) is automatically detected. ● The S-VHS indicator lights up when you play back a tape recorded in S-VHS mode or in SVHS ET mode (੬ pg. 27) ● If "VIDEO CALIBRATION" is set to "ON" (default setting: ੬ pg. 40), "VIDEO CALIBRATION" appears on the screen, and this VCR checks the tape condition during automatic tracking. ● If the tape ends during playback or fast-forward search, the cassette indication " " blinks for a few seconds and the VCR starts rewinding the tape automatically. To stop playback Press STOP ( 7 ) on the Remote or STOP/EJECT ( 7 / 0 ) on the front panel. To rewind the tape Press REW ( 1 ) (or turn the JOG dial on the front panel to the left). To fast-forward the tape Press FF ( ¡ ) (or turn the JOG dial on the front panel to the right). To eject the tape Press STOP/EJECT ( 7 / 0 ) on the front panel when the tape is not running. ● You can also eject the cassette with the VCR turned off. To turn off the VCR Press POWER. Clean the video heads using a dry cleaning cassette - TCL-2UX - when: • Rough, poor picture appears while a tape is played back. • The picture is unclear or no picture appears. • "USE CLEANING CASSETTE" appears on the screen (only with "SUPERIMPOSE" set to "ON": ੬ pg. 39, 40.)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68

EN
21
BASIC PLAYBACK AND RECORDING
Basic
Playback
This VCR can check the tape condition during playback
(and recording), and realizes the best possible pictures.
Load a cassette
Make sure the window side is up, the rear label
side is facing you and the arrow on the front of
the cassette is pointing towards the VCR.
Do not apply too much pressure when inserting.
The VCR turns on automatically.
The counter is automatically reset to “0:00:00”.
If the cassette’s record safety tab has been
removed, playback begins automatically.
Start playback
Press
PLAY (
3
)
.
Tape speed (SP or EP) is automatically detected.
The S-VHS indicator lights up when you play
back a tape recorded in S-VHS mode or in S-
VHS ET mode (
±
pg. 27)
If “VIDEO CALIBRATION” is set to “ON”
(default setting:
±
pg. 40), “VIDEO
CALIBRATION” appears on the screen, and this
VCR checks the tape condition during
automatic tracking.
If the tape ends during playback or fast-forward
search, the cassette indication “
” blinks for
a few seconds and the VCR starts rewinding the
tape automatically.
To stop playback
Press
STOP (
7
)
on the Remote or
STOP/EJECT (
7
/
0
)
on the front panel.
To rewind the tape
Press
REW (
1
)
(or turn the
JOG
dial on the front
panel to the left).
To fast-forward the tape
Press
FF (
¡
)
(or turn the
JOG
dial on the front panel
to the right).
To eject the tape
Press
STOP/EJECT (
7
/
0
)
on the front panel when the
tape is not running.
You can also eject the cassette with the VCR turned off.
To turn off the VCR
Press
POWER
.
Turn on the VCR and the TV, and select the VCR
channel 3 or 4 (or AV mode) on the TV.
Clean the video heads using a dry
cleaning cassette — TCL-2UX —
when:
• Rough, poor picture appears while a tape is played
back.
• The picture is unclear or no picture appears.
• “USE CLEANING CASSETTE” appears on the screen
(only with “SUPERIMPOSE” set to “ON”:
±
pg. 39,
40.)
1
2
3
4
5
6
7
8
9
0
2
4
1
3
STOP (
7
)
FF (
¡
)
REW (
1
)
POWER
JOG dial
VIDEO (MONO)L—AUDIO—R
S VIDEO
S-VHS ET
FF
REW
POWER
REC
PAUSE
STOP/EJECT
+
CH– /+
PUSH / TURN
24HR QUICK
PROGRAM
REC LINK
A.DUB
INSERT
STOP/EJECT
(
7
/
0
)
POWER