JVC HR-XVC18B Instruction Manual - Page 26

Additional VCR Information S-VHS Quasi Playback (SQPB) • During manual recording, timer recording, Instant Timer Recording, playback, or fast forward modes, the DVD+VCR automatically starts rewinding the tape at the end of the tape. The cassette stops at the beginning of the tape and is ejected. • After you have finished using the DVD+VCR, rewind, eject, and remove the cassette. Place the cassette in its protective sleeve to protect it from dust. It is not necessary to rewind the cassette before removing it, but if you do, it is ready to play or record the next time you use it. • Be sure the DVD+VCR channel selector is on the correct channel you wish to record. The channel that is being recorded can always be checked by setting the television on the DVD+VCR channel (CH 3 or 4) and pressing the TV/VCR to turn the DVD+VCR's TV indicator off. • Do not attempt to hook up more than one television set to the DVD+VCR for either recording or playback. VCR Auto Play System This DVD+VCR features automatic playback. When you load a tape with the safety tab removed the following occurs: • The Output Source is changed to VCR mode automatically. • The power turns on automatically and playback begins. • At the end of the tape, the DVD+VCR stops, then rewinds. • The tape is ejected after rewinding and the turns itself off automatically. • This DVD+VCR can play back S-VHS recorded tapes, however, it cannot record video on S-VHS format. • SQPB is an abbreviation for S-VHS Quasi Playback. Note: Playback picture of SQPB may be distorted in the following cases: • When starting playback. • When changing the playback mode between for- ward or reverse picture search and normal playback. • When changing the operating deck (VCR or DVD). Easy Information If the Extended Data Service (XDS) signals are provided along with normal TV signal in your area or during playback of a tape recorded with Extended Data Service (XDS) signals, the station ID, program title, and program details are shown on the TV screen. When viewing a channel with Extended Data Service (XDS) signals, press ENTER / OK and the station ID will appear on the TV screen. Press ENTER / OK again and the program details will appear on the TV screen. When viewing a tape recorded with Extended Data Service (XDS) signals, press ENTER / OK twice and the program title and program details will appear on the TV screen. Program Details LENGTH: Indicates the run length of a program. TIME REMAINING: Indicates the remaining time of a program. RATING: Indicates the rating of the current program (N/A, G, PG, PG-13, R, NC-17, X and Not Rated). The rating N/A means that the motion picture ratings are not applicable to this program. CH 4 SP WABC STEREO Note: Auto power off does not function during regular DVD play mode. (DVD+VCR power stays on.) "Home video" APR 30 , SAT 2:15 PM Easy Information Screen (Station ID) PROGRAM DETAILS "Home video" LENGTH 01:00 TIME REMAINING 00:26 RATING N/A Easy Information Screen (Program details) 26