JVC HR-XVC18B Instruction Manual - Page 28

Still Picture and Frame-by-Frame Playback DVD VCD 1. Press PAUSE (X) during playback. Advance the picture frame-by-frame by pressing PAUSE (X) repeatedly. 2. To exit still motion mode, press PLAY(N). Search DVD VCD 1. Press REW (m) or FF (M) during playback. 2. Press REW (m) or FF (M) repeatedly to select the required speed. DVD: X2, X4, X16 or X100 VCD: X2, X4 or X8 3. To exit SEARCH mode, press PLAY (N). Time Search DVD VCD To start playing at any chosen time on the disc: 1. Press DISPLAY during playback. The time search box shows the elapsed playing time. 2. Press v / V to select the time clock icon and "-:--:--" appears. 3. Input the required start time in hours, minutes, and seconds from left to right. If you enter the wrong numbers, press CLEAR (0000) to remove the numbers you entered. Then input the correct numbers. 4. Press ENTER / OK to confirm. Playback starts from the selected time. Repeat DVD VCD You can repeat a title/chapter on a disc. Press REPEAT during playback to select a desired repeat mode. DVD Video Discs - Repeat Chapter / Title / Off • Chapter: repeats the current chapter. • Title: repeats the current title. • Off: does not play repeatedly. Video CDs - Repeat Track / All / Off • Track: repeats the current track. • All: repeats all the tracks on a disk. • Off: does not play repeatedly. Notes: • On a Video CD with PBC, you must set PBC to Off on the setup menu to use this function (See "PBC" on page 19). • If you press > once during Repeat Chapter (Track) playback, the repeat playback cancels. Repeat A-B DVD VCD A - B To repeat a sequence. 1. Press REPEAT A-B at your chosen starting point. " A - " appears briefly on the TV screen. 2. Press REPEAT A-B again at your chosen end point. "A - B" appears briefly on the TV screen and the repeat sequence begins. 3. Press REPEAT A-B again to cancel. Marker Search DVD VCD To enter a Marker You can start playback from up to nine memorized points. To enter a marker, press MARKER at the desired point on the disc. The Marker icon appears on the TV screen briefly. Repeat to enter up to nine markers. To Recall or Clear a Marked Scene 1. During disc playback, press SEARCH. The marker search menu appears on the screen. 2. Within 10 seconds, press b / B to select a marker number that you want to recall or clear. 3. Press ENTER / OK and playback starts from the marked scene. Or, Press CLEAR (0000) and the marker number is erased from the list. 4. You can play any marker by inputting its number on the marker search menu. Zoom DVD VCD Use zoom to enlarge the video image. 1. Press ZOOM during playback or still playback to activate the Zoom function. The square frame appears briefly in the right bottom of the picture. 2. Each press of ZOOM changes the TV screen in the sequence: 100% size → 150% size → 200% size → 300% size → 400% size → 100% size 3. Use the b B v V buttons to move through the zoomed picture. 4. To resume normal playback, press ZOOM repeatedly or CLEAR (0000) button. Note: Zoom may not work on some DVDs or VCDs. 28