JVC HR XVC1U Instructions - Page 18

Setting the Video Channel / Setting the language Setting the Video Channel To view playback of a recorded tape, or to watch a program selected by the VCR's channel selector, the TV must be set to channel 3 or 4 (video channel). TV VCR DVD POWER DVD MENU DISPLAY SP/EP PLAY MODE MARKER A.TRK SUB TITLE ZOOM RETURN OPEN/ CLOSE C.RESET ZERO RETURN ANGLE SEARCH MODE TITLE REPEAT A-B TV POWER INPUT When a TV is connected with the 75 ohm coaxial cable only. 1 Press POWER to turn on the DVD/VCR. 2 Slide TV/VCR/DVD switch to VCR/DVD. Then press VCR to select the VCR mode. The VCR indicator on the front panel will light. 3 Set the 3/4 Channel selector switch on the rear panel to CH 3 or 4. 4 Turn ON the TV and set to CH 3 or 4 to correspond with the channel selected in step 3. 5 Press TV/VCR to select the VCR position. The VCR indicator will appear in the display. 6 Select any channel to receive a TV station in your area. The channel number will appear on the screen for about 4 seconds. For a push-button TV tuner If CH 3 or 4 corresponding to the video channel cannot be tuned on your TV, proceed as follows: set the VCR 3/4 channel selector and the TV to CH 3 or 4, play back a prerecorded tape and tune the TV to receive a sharp color picture from the video cassette recorder. Refer to your TV owner's manual for details. TV VOL 0 TIMER TV/VCR PLAY REW FF REC SKIP /INDEX STOP TV/VCR CH + PAUSE SKIP /INDEX SET ENTER/ SELECT SET UP MENU OSD TV/VCR CH - SLOW A.MONITOR SET CANCEL SSEKAIRPCH NOTE: • If the unit does not operate properly, or No key operation (by the unit and/or the remote control): Static electricity, etc., may affect the player's operation. Disconnect the AC power cord once, then connect it again. • If no buttons are pressed for more than 60 seconds,the MENU screen will return to normal TV operation automatically. • Both the VCR and the DVD have their own menu options (See page 36). 18 Setting the language You can choose from three different languages (English, French and Spanish) for the on-screen displays. 1 Press SETUP MENU, If you use the unit for the first time and press SETUP MENU, instead of the main menu screen on the right the SYSTEM SET UP menu screen in step 2 may appear. MENU TIMER REC SET AUTO REPEAT ON OFF SAP ON OFF SURROUND ON OFF CH SET UP SYSTEM SET UP 〈+/-/ENTER/MENU〉 2 Press or to select the "LANGUAGE" option, then press ENTER. SYSTEM SET UP CLOCK SET LANGUAGE/IDIOMA/LANGUE NO NOISE BACKGROUND ON OFF AUTO CLOCK ON OFF STANDARD TIME DAYLIGHT SAVING TIME 〈+/-/ENTER/MENU〉 3 Press or to select the desired language: English (ENGLISH), Spanish (ESPAÑOL) or French (FRANCAIS), then press ENTER. 4 Press SETUP MENU until the MENU screen is cleared.