JVC HR XVC1U Instructions - Page 28

Recording a TV program Recording and viewing the same TV program Preparation: • Turn ON the TV and set it to the video input mode. • Make sure TV/VCR/DVD switch has been slided to VCR/DVD. Then press VCR to select the VCR mode. (The VCR indicator will light) TV VCR DVD POWER 1 Load a cassette tape with the erase prevention tab intact. The VCR will automatically turn on. DVD MENU DISPLAY SP/EP PLAY MODE MARKER A.TRK SUB TITLE ZOOM RETURN OPEN/ CLOSE C.RESET ZERO RETURN ANGLE SEARCH MODE TITLE REPEAT A-B TV POWER INPUT TV VOL 0 TIMER TV/VCR PLAY REW FF REC SKIP /INDEX STOP TV/VCR CH + PAUSE SKIP /INDEX SET ENTER/ SELECT SET UP MENU OSD TV/VCR CH - SLOW A.MONITOR SET CANCEL SSEKAIRPCH VCR/DVD/TV NOTE: • If the erase prevention tab is removed, the tape will eject when both the REC and PLAY are pressed for recording. • If you wish to watch the DVD playback during the normal recording on VCR, press DVD to change to DVD mode and perform the DVD playback(see P.37). 28 2 Press SP/EP to select the desired tape speed SP or EP. The tape counter and SP or EP will appear on the screen for about 4 seconds. 00 : 00 : 00 SP 3 Set the TV/CATV option to the appropriate position (See page 19). TV - VHF/UHF channels CATV - CABLE TV channels 4 Press Number keys or VCR CH +/- to select the channel to be recorded. 1-9 Press 0 twice and then 1-9 as required. Example: To select 2, Press "002". 10-12 Press 0 first and then the remaining 2 digits in order from left to right. Example: Press 012 for "12". 13-99 Press 2 digits in order. CH 110 Example: Press 22 for "22". 100-125 Press the 3 digits in order. Example: Press 110 for "110". VHF/UHF/CATV CHANNELS TV VHF 2-13 UHF 14-69 CATV VHF 2-13 STD/HRC/IRC 14-36 (A) (W) 37-59 (AA) (WW) 60-85 (AAA) (ZZZ) 86-94 (86) (94) 95-99 (A-5) (A-1) 100-125 (100)(125) 01 (5A) 5 On the VCR, press REC. Or on the Remote, while holding REC, CH 110 press PLAY. " " will appear on the screen for about 4 seconds and "REC" will INDEX appear on the display.