JVC KD-BT11 Instructions - Page 11
Deleting a registered device, Connecting a registered device PHONE, AUDIO, Disconnecting a device - bluetooth code
UPC - 046838032905
View all JVC KD-BT11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
ENGLISH 1 Move to the next (or previous) number position. 2 Select a number. Connecting a registered device (PHONE/ AUDIO) Perform steps 1 and 2 on page 10, then... 1 Select "CNNCT PHONE" or "CNNCT AUDIO." 2 Select a device you want. 3 Repeat steps 1 and 2 until you finish entering a PIN code. 4 Confirm the entry. "CONNECTING" flashes, then "CONNECTED" appears on the display when the device is connected. 5 Operate the target Bluetooth device, (while "WAIT PAIR" is flashing on the display). On the device to be connected, enter the same PIN code you have just entered for this unit. "PAIRING" flashes, then "PAIRING OK" appears on the display when the connection is established. Now you can use the device through the unit. You can set the unit to connect the Bluetooth device automatically when the unit is turned on. (See "AUTO CNNCT" on page 26.) Disconnecting a device (PHONE/AUDIO) Perform steps 1 and 2 on page 10, then... Select "DISCN PHONE" or "DISCN AUDIO." The device remains registered even after you disconnect the device. Use "CNNCT PHONE" or "CNNCT AUDIO" (or activate "AUTO CNNCT") to connect the same device from next time on. (See the following and page 26.) "DISCONNECT" appears on the display. Deleting a registered device Perform steps 1 and 2 on page 10, then... 1 Select "DELETE PAIR." 2 Select a device you want to delete, then select "YES." OPERATIONS 11