JVC KD-BT11 Instructions - Page 23
General settings - PSM - demo mode
UPC - 046838032905
View all JVC KD-BT11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
ENGLISH General settings-PSM You can change PSM (Preferred Setting Mode) items listed in the table below and on pages 24 and 25. 1 Enter the PSM settings. 3 Adjust the PSM item selected. 2 Select a PSM item. 4 Repeat steps 2 and 3 to adjust other PSM items if necessary. 5 Finish the procedure. Indications Item ( : Initial) Setting, [reference page] DEMO Display demonstration • DEMO ON • DEMO OFF : The display demonstration will be activated automatically if no operation is done for about 20 seconds, [4]. : Cancels. CLOCK DISP*1 Clock display • CLOCK ON • CLOCK OFF : The clock time is always shown on the display when the power is turned off. : Cancels; pressing DISP will show the clock time for about 5 seconds when the power is turned off, [4]. CLOCK HOUR 1 - 12 Hour adjustment [Initial: 1 (1:00)], [4]. CLOCK MIN 00 - 59 Minute adjustment [Initial: 00 (1:00)], [4]. *1 If the power supply is not interrupted by turning off the ignition key of your car, it is recommended that you select "CLOCK OFF" to save the car's battery. Continued on the next page SETTINGS 23