JVC KD-BT11 Instructions - Page 26

ENGLISH Bluetooth settings You can change the settings listed on the right column according to your preference. 1 Enter the Bluetooth menu. 2 Select "SETTINGS." 3 Select a setting item. AUTO CNNCT = AUTO ANSWER = MSG NOTICE*1 = MIC SETTING = PHONEBOOK = INITIALIZE = INFORMATION = (back to the beginning) 4 Change the setting accordingly. • If "PHONEBOOK" is selected in step 3, enter the PIN code both for this unit and Bluetooth phone (see pages 10 and 11: steps 4 and 5), then press 5 to exit. Setting menu ( : Initial) AUTO CNNCT (connect) When the unit is turned on, the connection is established automatically with... OFF: No Bluetooth device. LAST: The last connected Bluetooth device. 26 SETTINGS AUTO ANSWER ON: The unit answers the incoming calls automatically. OFF: The unit does not answer the calls automatically. Answer the calls manually. REJECT: The unit rejects all incoming calls. MSG NOTICE (message notice) ON*1: The unit informs you of the arrival of a message by ringing and displaying "RCV MESSAGE" (receiving message). OFF: The unit does not inform you of the arrival of a message. MIC SETTING (microphone setting) Adjust the built-in microphone volume, [LEVEL 01/02/03]. PHONEBOOK Load the phone book of the Bluetooth phone to the unit. (You can load up to 50 phone numbers.) • Before using this function, make sure that the Bluetooth phone is connected. INITIALIZE YES: Initialize all settings you have made in the Bluetooth menu. NO: Return to the previous screen. INFORMATION NAME: Name of the unit (as shown on Bluetooth devices). ADDRESS: Address of the unit. VERSION: Hardware and software versions of the Bluetooth module. PHONE NAME*2: Name of the connected Bluetooth phone. AUDIO NAME*2: Name of the connected Bluetooth audio player. *1 If the connected Bluetooth phone does not support text message notification (via Bluetooth), the unit will not receive any notification upon the arrival of a text message. *2 Appears only when a Bluetooth phone/audio player is connected.