JVC KD-R960BTS Instruction Manual - Page 33
Wiring connection
View all JVC KD-R960BTS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Wiring connection (for KD-R960BTS / KD-AR865BTS) KD-R960BTS Front output Rear/subwoofer output KD-AR865BTS Rear output Front output Subwoofer output Vehicle dashboard *1 Firmly connect the ground wire of the amplifier to the car's chassis to avoid damaging the unit. Signal cord (not supplied) JVC Amplifier*1 Fuse (10 A) MIC (Microphone input terminal) ( 14) Factory wiring harness (vehicle) Vehicle-specific Wiring Harness (separately purchased) For more information: Metra Electronics: www.metraonline.com Scosche Industries: www.scosche.com To the steering wheel remote control adapter Recommended connection Blue: To power antenna Blue/white: To amplifier Brown (Not used) Antenna terminal Light blue/yellow STEERING WHEEL REMOTE Join the same color wires together. Blue/white: Remote (200 mA max.) Orange/white: Illumination Yellow: Battery 12 V Red: Ignition 12 V Black: Ground Gray: Front speaker (right) Gray/black White: Front speaker (left) White/black Purple: Rear speaker (right) Purple/black Green: Rear speaker (left)*2 Green/black *2 To the optional SiriusXM Vehicle Tuner (commercially available) ( 11) Remote wire (not supplied) Ignition switch Car fuse block Separate red wire Make this connection if your vehicle factory wiring harness does not have "12 V ignition switch" wire. *2 You can also connect a subwoofer speaker directly using this lead without an external subwoofer amplifier. For setting, 21, 22. ENGLISH 31