JVC KD-X270BT Instruction Manual America - Page 31
A PAIRING, X 6-digit passkey, B PAIRING, PIN IS 0000, C PAIRING
View all JVC KD-X270BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Bluetooth® [BT MODE] [PHONE SELECT] [AUDIO SELECT] [DEVICE DELETE] [PIN CODE EDIT] (0000) [RECONNECT] [AUTO PAIRING] [INITIALIZE] [INFORMATION] Default: [XX] Selects the phone or audio device to connect or disconnect. " " appears in front of the device name when connected. " " appears in front of the current playback audio device. • You can connect a maximum of two Bluetooth phones and one Bluetooth audio device at a time. 1 Turn the volume knob to select a device to delete, then press the knob. 2 Turn the volume knob to select [YES] or [NO], then press the knob. Changes the PIN code (up to 6 digits). 1 Turn the volume knob to select a number. 2 Press S / T to move the entry position. Repeat step 1 and step 2 until you finish entering the PIN code. 3 Press the volume knob to confirm. [ON]: The unit is automatically reconnect when the last connected Bluetooth device is within the connectable range. ; [OFF]: Cancels. (For KD-X470BHS/KD-X370BTS/KD-X37MBS) [ON]: The unit is automatically paired with the supported Bluetooth device (iPhone/iPod touch) when it is connected through USB input terminal. Depending on the operating system of the connected device, this function may not work. ; [OFF]: Cancels. [YES]: Initializes all the Bluetooth settings (including stored pairing, phonebook, and etc.). ; [NO]: Cancels. [MY BT NAME]: Displays the name of your receiver ("KD-X470BHS"/ "KD-X370BTS"/"KD-X37MBS"/"KD-X270BT"/"KD-SX26BT"). ; [MY ADDRESS]: Shows address of this unit. Bluetooth compatibility check mode You can check the connectivity of the supported profile between the Bluetooth device and the unit. • Make sure there is no Bluetooth device paired. 1 Press and hold . "BLUETOOTH" "CHECK MODE" appears. "SEARCH NOW USING PHONE" "PIN IS 0000" scrolls on the display. 2 Search and select the name of your receiver ("KD-X470BHS"/ "KD-X370BTS"/"KD-X37MBS"/"KD-X270BT"/"KD-SX26BT") on the Bluetooth device within 3 minutes. 3 Perform (A), (B) or (C) depending on what appears on the display. (A) "PAIRING" "XXXXXX" (6-digit passkey): Ensure that the same passkey appears on the unit and Bluetooth device, then operate the Bluetooth device to confirm the passkey. (B) "PAIRING" "PIN IS 0000": Enter "0000" on the Bluetooth device. (C) "PAIRING": Operate the Bluetooth device to confirm pairing. After pairing is done successfully, "PAIRING OK" "Device Name" appears and Bluetooth compatibility check starts. If "CONNECT NOW USING PHONE" appears, operate the Bluetooth device to allow phonebook access to continue. "TESTING" flashes on the display. ENGLISH 25