JVC KD-X270BT Instruction Manual America - Page 38
Connection via speaker leads, Crossover settings, CAUTION
![]() |
View all JVC KD-X270BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Audio Settings Connection via speaker leads You can also connect the speakers without using an external amplifier but still being able to enjoy the subwoofer output with these settings. (Page 45) Setting on [SPK/PRE OUT] Audio signal through rear speaker lead L (left) R (right) [REAR/REAR] Rear speakers output Rear speakers output [REAR/SUB.W]* Rear speakers output Rear speakers output [SUB.W/SUB.W] Subwoofer output (Mute) If [SUB.W/SUB.W] is selected: - [120HZ] is selected in [SUBWOOFER LPF] and [THROUGH] is not available. (Page 33) - [POSITION R02] is selected in [FADER] and selectable range is [POSITION R15] to [POSITION 00]. (Page 30) * Except for KD-X470BHS/KD-X370BTS/KD-X37MBS. Crossover settings Below are the available setting items for 2-way crossover and 3-way crossover. CAUTION Select a crossover type according to how the speakers are connected. (Page 45, 46) If you select a wrong type: • The speakers may be damaged. • The output sound level may be extremely high or low. SPEAKER SIZE Selects according to the connected speaker size for optimum performance. • The frequency and slope settings are automatically set for the crossover of the selected speaker. • If [NONE] is selected for the following speaker in [SPEAKER SIZE], the [X ' OVER] setting of the selected speaker is not available. - 2-way crossover: [TWEETER] of [FRONT]/[REAR]/[SUBWOOFER] - 3-way crossover: [WOOFER] X ' OVER (crossover) • [FRQ]/[F-HPF FRQ]/[R-HPF FRQ]/[SW LPF FRQ]/[HPF FRQ]/[LPF FRQ]: Adjusts the crossover frequency for the selected speakers (high pass filter or low pass filter). If [THROUGH] is selected, all signals are sent to the selected speakers. • [SLOPE]/[F-HPF SLOPE]/[R-HPF SLOPE]/[SW LPF SLOPE]/[HPF SLOPE]/[LPF SLOPE]: Adjusts the crossover slope. Selectable only if a setting other than [THROUGH] is selected for the crossover frequency. • [SW LPF PHASE]/[PHASE]: Selects the phase of the speaker output to be in line with the other speaker output. • [GAIN LEFT]/[GAIN RIGHT]/[F-HPF GAIN]/[R-HPF GAIN]/[SW LPF GAIN]/[GAIN]: Adjusts the output volume of the selected speaker. 32 ENGLISH
![](/manual_guide/products/jvc-kdx470bhs-instruction-manual-america-d13cd36/38.png)