JVC KD-X330BTS Instruction Manual - Page 29
How to remove the unit, When installing without the mounting sleeve, Installing the unit in-dash
View all JVC KD-X330BTS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
INSTALLATION / CONNECTION Installing the unit (in-dash mounting) Do the required wiring. ( 26, 27) Part list for installation (A) Faceplate (B) Trim plate Hook on the top side Orientate the trim plate as illustrated before fitting. Dashboard of your car Bend the appropriate tabs to hold the sleeve firmly in place. When installing without the mounting sleeve 1 Remove the mounting sleeve and trim plate from the unit. 2 Align the holes in the unit (on both sides) with the vehicle mounting bracket and secure the unit with screws (commercially available). Use only the specified screws. Using wrong screws might damage the unit. How to remove the unit (C) Mounting sleeve (E) Wiring harness (for KD-X330BT) (D) Extraction key (F) Wiring harness (for KD-X33MBT) ENGLISH 25