JVC KD-X330BTS Instruction Manual - Page 31

Wiring connection (for KD-X33MBT) JVC Amplifier*1 Signal cord (not supplied) Fuse (10 A) Rear/ Front/ Subwoofer output For 3-way crossover: Tweeter/ Mid Range/ Woofer output IMPORTANT We recommend installing the unit with a commercially available custom wiring harness specific for your car and leave this job to professionals for your safety. Consult your car audio dealer. Microphone input jack ( 9) Remote wire (not supplied) Ignition switch Car fuse block Separate red wire Make this connection if your vehicle factory wiring harness does not have "12 V ignition switch" wire. Antenna terminal Vehicle dashboard Light blue/yellow STEERING WHEEL REMOTE To the steering wheel remote control adapter Join the same color wires together. Blue/white: Remote (200 mA max.) Orange/white: Illumination Yellow: Battery 12 V Red: Ignition 12 V Black: Ground Gray: Front speaker/For 3-way crossover: Mid range speaker (right) Gray/black White: Front speaker/For 3-way crossover: Mid range speaker (left) White/black Purple: Rear speaker/For 3-way crossover: Tweeter (right) Purple/black Green: Rear speaker*2/For 3-way crossover: Tweeter (left) Green/black *2 Blue: To power antenna Blue/white: To amplifier (Not used) Brown Factory wiring harness (vehicle) Custom wiring harness (separately purchased) *1 Firmly connect the ground wire of the amplifier to the car's chassis to avoid damaging the unit. *2 You can also connect a subwoofer speaker directly using this lead without an external subwoofer amplifier. For setting, 16. Recommended connection ENGLISH 27