JVC KD-X50BT Instructions - Page 21
Menu operations - installation
View all JVC KD-X50BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Menu operations 1 (Hold) If no operation is done for about 60 seconds, the operation will be canceled. 2 Menu operations 3 Repeat step 2 if necessary. To return to the previous menu, press . To exit from the menu, press DISP or MENU. Menu item Selectable setting (Initial: [XX]) CLOCK DEMO CLOCK SET CLOCK ADJ *1 (Clock adjustment) COLOR COLOR SETUP For settings, ' page 4. For settings, ' page 4. [AUTO]: The built-in clock is synchronized with the clock data received from the FM Radio Broadcast Data System station. OFF: Cancels. For settings, ' page 19. DIMMER DIMMER SET Selects the display and button illumination adjusted in the / setting. [AUTO]: Changes between the Day and Night adjustments when you turn off/on the car headlights. *2 ON: Selects the Night adjustments. OFF: Selects the Day adjustments. DISPLAY BRIGHTNESS SCROLL *3 TAG DISPLAY PRO EQ FADER *4*5 BALANCE *5 LOUD (Loudness) DAY[31]/NIGHT[15]: Brightness settings for the display and button illumination for day and night. BUTTON ZONE/DISP ZONE: Sets the brightness levels 00 - 31. [ONCE]: Scrolls the display information once. AUTO: Repeats scrolling (at 5-second intervals). OFF: Cancels. [ON]: Shows the TAG information while playing MP3/WMA/WAV tracks. OFF: Cancels. For settings, ' page 20. R06 - F06[00]: Adjusts the front and rear speaker output balance. L06 - R06[00]: Adjusts the left and right speaker output balance. ON: Boosts low and high frequencies to produce a well-balanced sound at a low volume level. [OFF]: Cancels. AUDIO *1 Takes effect only when clock data is received. *2 The illumination control lead connection is required. (See "Installation/Connection Manual".) This setting may not work correctly on some vehicles (particularly on those having a control dial for dimming). In this case, change the setting to other than . *3 Some characters or symbols will not be shown correctly (or will be blanked) on the display. *4 If you are using a two-speaker system, set the fader level to "00". *5 This adjustment will not affect the subwoofer output. ENGLISH |ޓ21