JVC KD-X50BT Instructions - Page 23
Ph Cnnt Dev - firmware
View all JVC KD-X50BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
BLUETOOTH *10 Menu operations Menu item USB *8 IPOD SWITCH *9 (iPod/iPhone control) AUDIOBOOKS *9 PHONE *11 AUDIO APPLICATION BT AUDIO SW *12 DELETE PAIR P. BOOK WAIT SET PINCODE AUTO CNNCT INITIALIZE INFORMATION AM *14 AUX IN *14 BT AUDIO *15 Selectable setting (Initial: [XX]) DRIVECHANGE: Selects to change the drive when a device with multiple drives is connected to the USB input terminal (front/rear). [HEAD MODE]/IPOD MODE/APP MODE: For settings, ' page 9. NORMAL/FASTER/SLOWER: Selects the playback speed of the Audiobooks sound file in your iPod/iPhone. Initial selection depends on your iPod/iPhone setting. CONNECT/DISCONNECT: Connects or disconnects the Bluetooth phone/ audio device. (' page 13) CONNECT/DISCONNECT: Connects or disconnects the application in the smart phone. (' page 14) Switches between "BT AUDIO" and "BT PANDORA". For settings, ' page 14. Copies up to 400 numbers from the phonebook memory of a connected phone to the unit via OPP. Changes the PIN code (1 to 6-digits). (Default PIN code: 0000) Turn the control dial to select a number, press / to move to the entry position. After entering the PIN code, press the control dial to confirm. [ON]: Establishes connection automatically with the Bluetooth device when the unit is turned on. OFF: Cancels. YES: Initializes all the Bluetooth settings (including stored pairing, phonebook, and etc.). [NO]: Cancels. PH CNNT DEV/AU CNNT DEV/APP CNT DEV *13: Displays connected phone/audio/application device name. MY BT NAME: Displays the unit name (JVC Unit). MY ADDRESS: Shows address of USB Bluetooth Adapter. [ON]/OFF: Enables or disables "AM" in source selection. [AUX ON]/AUX OFF: Enables or disables "AUX IN" in source selection. [BT AU ON]/BT AU OFF: Enables or disables "BT AUDIO" in source selection. SRC SELECT SOFT VER Displays the firmware version of the unit. *8 Displayed only when the source is "USB FRONT/USB REAR". *9 Displayed only when the source is "IPOD-FRONT/IPOD-REAR". *10 If the USB Bluetooth Adapter is not connected to the unit, "PLEASE CNNT BT ADAPTER" scrolls on the display. *11 will not be displayed if two Bluetooth phones are connected at the same time. *12 Displayed only when the source is "BT FRONT/BT REAR". *13 Displayed only when a Bluetooth phone/audio player/application is connected. *14 Displayed only when the unit is in any source other than the corresponding source "AM/AUX IN". *15 Displayed only when the USB Bluetooth Adapter (KS-UBT1) is attached and current source is not "BT FRONT/ BT REAR". ENGLISH |ޓ23