JVC KD-X50BT Instructions - Page 27

Troubleshooting Troubleshooting Symptom 4 General No sound, sound interrupted or static noise. "MISWIRING CHK WIRING THEN RESET UNIT"/"WARNING CHK WIRING THEN RESET UNIT" appears on the display and no operations can be done. The unit does not work at all. Source cannot be selected. The correct characters are not displayed (e.g. album name). 4 FM/AM SSM automatic presetting does not work. 4 USB/iPod/iPhone "READING" keeps flashing on the display. Tracks/folders are not played back in the order you have intended. "NO FILE" appears on the display. "NOT SUPPORT" appears on the display and track skips.  "CANNOT PLAY" flashes on the display.  The unit cannot detect the connected device. The iPod/iPhone does not turn on or does not work. "CANNOT SKIP" "NO STATION" "NO ACTIVE STATION" "SET UP PANDORA ON YOUR DEVICE" New station creation: "NO STATION" "STATION REACH LIMIT" "CANNOT MAKE NEW STATION" Remedy/Cause  Check the cords, antenna and cable connections.  Check the condition of the connected device and recorded tracks.  Ensure to use the recommended stereo mini plug when connecting to an external component. (' page 11) Ensure the terminals of the speaker leads are properly insulated with tape before resetting the unit. (' page 3) If the message does not disappear, consult your JVC car audio dealer or kits supplying company. Reset the unit. (' page 3) Check the setting. (' page 23) This unit can only display letters (upper case), numbers, and a limited number of symbols. Store stations manually.  A longer readout time is required. Do not use too many hierarchical levels and folders.  Reattach the USB device. The playback order is determined by the file name. Check whether the selected folder, the connected USB device, or the iPod/iPhone contains a playable file. Check whether the track is a playable file format.  Check whether the connected device is compatible with this unit. (USB: ' page 29) (iPod/iPhone: ' page 26)  Ensure that the device contains files in the supported formats. (' page 25)  Reattach the device.  Check the connection between this unit and iPod/iPhone.  Detach and reset the iPod/iPhone using hard reset. For details on resetting the iPod/iPhone, refer to the instruction manual supplied with the iPod/iPhone.  Check whether setting is appropriate. (' page 9) The skip limit has been reached. No registered station in your iPod/iPhone. No active station. Pandoraா setup is not completed. Connect the iPod/iPhone to this unit after completing the setup in your iPod/iPhone. There are no stations found for the current song or artist. You may not create more than 100 stations. There is a problem creating a new station, such as a network issue. Pandoraா ENGLISH‫ |ޓ‬27