JVC KW-AVX820 Instructions - Page 20
Sound, Menu item, Selectable setting/item - reset
UPC - 046838036569
View all JVC KW-AVX820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
ENGLISH Sound Initial: Underlined Menu item Selectable setting/item Fader/Balance Fader/Balance Reset Fader 0 Balance 0 Back Volume Adjust *1 Subwoofer Level High Pass Filter Crossover Amplifier Gain *2 Rear Speaker *3 Fader : Adjust the front and rear speaker output balance. ♦ F6 to R6; Initial 0 • When using a two-speaker system, set the fader to the center (0). Balance : Adjust the left and right speaker output balance. ♦ L6 to R6; Initial 0 Press [5/∞/2/3] or drag [ ] to adjust. Adjust and store the auto-adjustment volume level for each source, comparing to the FM volume level. The volume level will automatically increase or decrease when you change the source. • appears if an FM broadcast is selected as the source. ♦ -12 to +12; Initial 00 Adjust the subwoofer output level. ♦ -06 to +08; Initial 00 ♦ Through ♦ On : Select when the subwoofer is not connected. : Select when the subwoofer is connected. Select the crossover frequency between the front/rear speakers and the subwoofer. ♦ 80Hz, 120Hz, 150Hz You can change the maximum volume level of this unit. ♦ Off : Deactivates the built-in amplifier. ♦ Low : VOL 00 to 30 (Select this if the maximum power of the speakers is less than 50 W.) ♦ High : VOL 00 to 50 You can activate/deactivate the rear speakers. ♦ On : Activate the rear speakers. ♦ Off : Deactivate the rear speakers. *1 For "DISC/USB": You can make the adjustments separately depending on the audio format-Dolby digital/MPEG Audio and the others. *2 The volume level automatically changes to "VOL 30" if you change to with the volume level set higher than "VOL 30." *3 This setting takes effect only when Dual Zone is activated. ( 37) 20