JVC KW-M750BT Operation Manual - Page 73
Controlling Audio, 3-way speaker system setup
View all JVC KW-M750BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Controlling Audio You can adjust various settings such as audio balance or subwoofer level. 1 Press the [FNC] button. hhPopup menu appears. 2 Touch [Audio]. Controlling Audio 4 Touch [AV Off]. 5 Press the button 1 followed by the button 2 for 1 second at the same time. KW-V850BT/ KW-V85BT/ KW-M750BT/ KW-M75BT 2 1 KW-M650BT See the following section for each setting. • Set up speaker / X'over (P.74) • Controlling equalizer / subwoofer level (P.76) • Set listening position / DTA (P.80) • Controlling general audio (Fader / Balance) (P.76) • Set volume offset (P.77) • Performing zone control (P.78) • Set sound effect (P.79) • Memory/recall the audio settings (P.82) 3-way speaker system setup Select the appropriate crossover network mode for the speaker system used (2-way or 3-way speaker system). 1 Press the [FNC] button. hhPopup menu appears. 2 Touch [ ]. hhHOME screen appears. 3 Touch [ ]. hhSource selection screen appears. 1 2 hhSpeaker system select screen appears. 6 Select the crossover network mode. hhA confirmation screen appears. 7 Touch [Yes]. NOTE • When the 3-way speaker system is selected, the following functions are disabled. --Front focus of Listening Position / DTA --Fader for Controlling General Audio --Zone Control --Selection of the speakers to output sound from the cell-phone of Bluetooth HF/Audio --Beep for User Interface Setup • Connecting 3-way speakers with the 2-way mode selected can break the speakers. English 73