JVC KW-V240BT Instruction Manual America - Page 51

Settings Remote Controller Update the system by connecting a USB device containing an update file. • To obtain the update file, visit . Connect a USB device with the update file to the unit. System Information Updates the system application. Updates the system. Updates the DVD system application. The system update starts. It may take a while. If the update has been completed successfully, "Update Completed" appears, then reset the unit. • Do not disconnect the USB device while updating. • If the update has failed, turn the power off and then on, and retry the update. • Even if you have turned off the power during the update, you can restart the update after the power is turned on. The update will be performed from the beginning. Shows the Open Source Licenses. Remote controller RM-RK258 is supplied for KW-V240BT Region 4. • For KW-V140BT/KW-V240BT Region 1/KW-V340BT: To use the remote controller, purchase optional remote controller, RM-RK258. Refer to the instruction manual supplied with the remote controller. • For KW-V240BT Region 4: The unit is equipped with a steering wheel remote control function. (Page 48) - See page 54 for connection. - Operations may differ depending on the type of steering wheel remote control. Remote sensor* * DO NOT expose the remote sensor to bright light (direct sunlight or artificial lighting). RM-RK258 Preparation Removing the battery sheet Pull the battery sheet out from the remote controller to activate the battery. Changing the battery of the remote controller CR2025 (+side) • Use a commercially available button battery (CR2025). • Insert the battery with the + and - poles aligned properly. - If the effectiveness of the remote controller decreases, replace the battery. CALIFORNIA, USA ONLY This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material - special handling may apply. See . ENGLISH 49