JVC KW-V250BT Instruction Manual America - Page 50
<Steering Remote Control Setting>
View all JVC KW-V250BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Settings Configure settings for using a Bluetooth device, such as connection and other general operations. For details, see "Bluetooth settings" on page 39. (Only for KW-V350BT Region 1) Get information, and change the settings for using the ADS adapter. This setting is available only when 2-way speaker system is selected. (Page 41) • ON (Initial): Activates the key-touch tone. • OFF: Deactivates the key-touch tone. Memorize, recall, or clear the settings you have made. • The memorized settings are kept even when the unit is reset. Touch [Yes] to display the setting screen, then select an operation: • Recall: Recalls the memorized settings. • Memory: Memorizes the current settings. • Clear: Clears the currently memorized settings and return to the factory (initial) settings. • Cancel: Cancels. A confirmation message appears. Touch [Yes]. (Only for KW-V350BT Region 4) This unit has its own Registration Code. Once you have played back a file with the Registration Code recorded, this unit's Registration Code is overwritten for copyright protection. • Touch [Enter] to display the information. • To return to the previous screen, touch [OK]. Initialize all settings you have made. Touch and hold [Enter] to initialize the settings. • After initializing the settings, adjust the settings on the screen. (Only for KW-V350BT Region 1) Displays the serial number. Adjust the touch positions of the buttons on the screen. Touch the center of the marks at the upper left (1), the lower center (2), then the upper right (3) as instructed. Touch Panel Adjust • To reset the touch position, touch [Reset]. • To cancel the current operation, touch [Cancel]. (Only for KW-V350BT Region 4) Assign functions to the keys of the remote controller on the steering wheel. • This function is available only when your car is equipped with the electrical steering remote controller. • You can only register/change the functions while you are parked. • If your steering remote controller is not compatible, learning may not be completed and an error message may appear. 1 Touch [Set] for to display the setting screen. 2 Press and hold a button on the steering remote controller to register or change. 3 Select a function to assign to the selected button. Steering Remote Control Setting Please select the function to assign to the button. Done VOL VOL ATT SRC 48 ENGLISH Cancel Reset